Electronics Forum | Thu Jan 29 16:10:09 EST 2004 | blnorman
Another equipment manufacturer is Smart Sonic. Most equipment manufacturers have their own chemistries, but they are also willing to use other cleaners. What we have done is to send boards that need to be cleaned to the equipment manufacturer. W
Electronics Forum | Thu Jul 13 21:12:41 EDT 2000 | Dason C
Hi! Larry, absolutely "NO". When you move the component out from the refridgerator, the moisture will condensed to the surface. The Eureka Dry Box is different, it use special desicannt in the drying module to absorb the moisture inside the box and
Electronics Forum | Thu Jul 13 21:12:41 EDT 2000 | Dason C
Hi! Larry, absolutely "NO". When you move the component out from the refridgerator, the moisture will condensed to the surface. The Eureka Dry Box is different, it use special desicannt in the drying module to absorb the moisture inside the box and
Electronics Forum | Sat Sep 08 09:36:26 EDT 2001 | davef
good : Imported/Hoegaarden Original => very good]. Finish mowing the lawn, plop-down in a chair on the back porch, fumigate the neighborhood with an A Feunte, and smile about having a cold wheat beer in hand with those little rivlets of condensed mo
Electronics Forum | Sat Oct 20 09:19:24 EDT 2001 | davef
"Phased out" is not the correct term. " Not economic" might be more appropriate. Check: R&D Technical Services (Centech) 12261 Suite A Nicollet Ave S Burnsville, MN 55337 (612) 707-1931 fax 6739 sales@rdtechnicalservices Further, Graham Naisbatt
Electronics Forum | Fri Jun 28 12:51:03 EDT 2002 | slthomas
I would be concerned about condensation with re-refrigerating (or re-re-refrigerating, even) paste that's been exposed to room air. I suppose the answer would be to getting a paste that allows for long term room temp storage. I've heard of new c
Electronics Forum | Wed Aug 04 00:22:17 EDT 2004 | Shean Dalton
and one more thought about your original question, if the flux does look really strange and out of place, then inspect the reflow oven. A great amount of flux condensation in the reflow oven's cooling zone can cause crystalized flux to become airbor
Electronics Forum | Wed Apr 27 15:14:12 EDT 2005 | andymackie
The viscosity decrease on warming is one of the main reasons, but you also don't want to get moisture condensing on the surface of the paste. Activators in the paste (that are used to eliminate solderballs and enhance solderability on reflow) become
Electronics Forum | Tue May 24 05:25:17 EDT 2005 | Zsolt
We had similar problem, the root cause was that the cooling fans on the VME rack were not working and the vision card hangs up if the temperature is too high. Also check the power supplies, we had also a problem that the filter condensator inside the
Electronics Forum | Mon Aug 29 03:38:34 EDT 2005 | GS
Just few brand names of VP reflow machines: - ASSCOM http://www.asscom.de - epmIBL http://www.epm.ch One of the the Heat Transfer Fluid used with today Vapor Phase Reflow(condensation) technology is the GALDEN that you can select according to