Electronics Forum | Sat Sep 06 00:24:37 EDT 2014 | padawanlinuxero
Hi, anyone here that can provide the DEK 07sp11 > installation software. (or newest version for > Typhoon series) ? I can't remember if the 07sp11 > was a full installation or only a patch. If only > a patch, I will need the previous full > inst
Electronics Forum | Mon Jul 29 08:21:54 EDT 2002 | pjc
All DEK 248 semi-auto printers have been built in China for quite some time (years). Its shipped to the UK from China. All DEK ELA models are now built in China (past 6 mos.?). Thats the fact Jack. All MPM models are built in Mass. Its the savings in
Electronics Forum | Mon Mar 24 14:19:36 EDT 2008 | burb1999
I have a DEK ELA and here is what happens. I print a board after going through the step and it is a dead on print. Then, with another print it will be off in Auto mode (sometimes up and sometimes down, seems to just be up and down not left to right
Electronics Forum | Thu Apr 04 16:38:51 EST 2002 | davef
Equipment companies like to talk about �accuracy� and �repeatability�. These measures provide limited information. Flaws of the measure aside, some printer companies have begun to report Cp. * DEK ELA: Cp = 1.33 @ �0.025mm * DEK 265: Cp = 1.6 @ �0.0
Electronics Forum | Mon Jul 29 09:19:00 EDT 2002 | pjc
Quick Change Tooling is one advantage for DEK when comparing the MPM UP2000. DEK has Form Flex. Good system, but I've heard concerns about long term dependabilty. All support tooling options offered on the UP2000 takes a bit of time to set up. So, If
Electronics Forum | Tue Oct 14 22:52:57 EDT 2003 | fastek
That's not a fair comparison. It's like putting a Ferrari next to a Volkswagon and asking which one you would choose if they both cost the same. The Infinity is a top of the line offering from DEK. The Accuflex is MPM's entry level machine for fully
Electronics Forum | Thu Jun 07 01:14:24 EDT 2018 | buckcho
Hello Diego, i will try to help you. Can you tell me which software of the DEK you use, also machine (Horizon, ela, etc)? In our machines (NEOHorizon 03ix) we can get this type of information in a few ways, but it requested by us to dek. We are using
Electronics Forum | Mon Dec 15 18:39:27 EST 2003 | Todd
I would say the DEK printer I have had the best reliability with. I have used the MPM and had alot of software problems. The GSP are as metioned harder to operate. I also agree that the top of the line DEK horizon has some issues (to smart for its
Electronics Forum | Tue Feb 19 01:20:33 EST 2002 | djarvis
Armin, I installed a second hand Dek Ela in-line in November. Prior to that we had been running 2 x SMTech (Quad ) Vmp100s, an MPM SP-2000 and an MPM SP-20. All semi-autos. I believe the Vmp100s to be a great machine and have recommended them to all
Electronics Forum | Thu Dec 08 16:08:25 EST 2005 | fastek
If you are happy with DEK I would stick with that. I'd look at an ELA or a Horizon model 03...which is their stripped down Horizon version. You can buy a new one of those in the $60K range...used obviously less. The only other vendor I would look a