Electronics Forum | Wed Feb 16 12:56:44 EST 2011 | gabriel1blue
Thank you, I have the program done and ready to run, but Im not able to get the machine to move to the mount location automatically, you say to highlight the location and press shift + P or T but how do I highlight the x,y data 1st? Or is this done o
Electronics Forum | Wed Feb 16 19:55:34 EST 2011 | jeffr
There are three versions of the CSM84, old, older and really old. The older machines can only do fun things around the PCB if you toggle RUNMODE 1 from AUTO to be UTILITY... then you can use the utility program "PIC" to trace around the PCB or do min
Electronics Forum | Thu Aug 21 14:39:50 EDT 2008 | johnhburris
We have been running a 2060 (along with a 2050) for about a year. Great machine; good follow up to the 700 series, of which we run several variants. We have a 2 shift, 5 day operation with 7 changeovers/shift. We've minimized downtime by building fee
Electronics Forum | Tue Feb 15 00:27:39 EST 2011 | jeffr
First clean and de-bur the hole in the nozzle, then try it again. If the Head does not pick up at the feeder, then moves to the dump position...it means that the Vacuum Sensor Board has detected that the nozzle vacuum is above the LOW threshold setti
Electronics Forum | Tue Apr 15 15:23:10 EDT 2003 | davem
I would agree with the advice given by previous poster's. "Buyer Beware" is the rule of the day. Especially when dealing with 3rd. party brokers. Keep an eye out for some of the teir 1 EMS corp's auctions. You can pick up some excellent deals on we
Electronics Forum | Fri Apr 11 16:11:32 EDT 2003 | stefwitt
The question new or used was discussed several times. If you start fresh and have no experience with one or the other machine vendor, I would get a new machine, whose supplier has a service tech in driving distance. If you select the used machine pa
Electronics Forum | Mon Apr 14 12:33:14 EDT 2003 | Brian W.
In many cases, if you buy a used machine, it is worth the investment to register your machine with the manufacturer. That way you have access to support and information for your machine. A number of the machine manufacturers also refurbish their eq
Electronics Forum | Wed Sep 03 17:44:07 EDT 2008 | Frank
Not to quibble, but I have been a Juki user for over 12 years and starting with the Juki machines 750/760 and all machines since support 8 characters for reference designators. We are even looking to upgrade later next year and they have already con
Electronics Forum | Wed Feb 16 00:57:44 EST 2011 | gabriel1blue
Thank you guys for your help I was able to get the machine running on all the heads and now I can at least run my boards, I have another question is there a way to have the camera move automatically to the location on the program or to do a search on
Electronics Forum | Sat Feb 12 13:19:27 EST 2011 | tpappano
A simple trick I read either here or on another P&P forum is to use "Silly Putty". Place a small thin spot of Silly Putty on the top of the front conveyor rail, and put the machine in "manual" mode. Steer head #1 over the putty and lower it, leavin
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774