Electronics Forum | Mon Jan 13 17:39:49 EST 2020 | avillaro2020
Hi, I need help on how to address the solder wicking on the samtec searay connector after reflow resulting to open solder joints on thick and thermal heavy PCB (4.4mm and 6.3mm). I increased my solder paste thickness to 8 mils, the connector is manua
Electronics Forum | Tue Oct 26 03:12:36 EDT 2004 | Joseph
Dear all, Recently our production encountered high SOIC failure during testing after reflow soldering. All solder fillets (side/heel) are acceptable as per IPC standard.The reject samples (SOIC)being sent to IC manufacturer to verify the failure. Fin
Electronics Forum | Mon Nov 17 21:30:10 EST 2003 | davef
Odds are that all of the completed product had corroded leads, if the components came from the same load / were processed similarly. ... but the issue is NOT corroded leads. The issue is well soldered connections. * If the solder connections on the
Electronics Forum | Tue Mar 17 10:06:51 EDT 2015 | chemers
Hi everyone. I hope someone or many someones can offer guidance. I have many magazines that have various problems. (Not feeding and/or not pulling tape on some slots) Does anyone have any information for repairing or troubleshooting these? It seems l
Electronics Forum | Fri Jul 23 09:01:36 EDT 1999 | Earl Moon
| HI Earl | Thank you for your answer. | Let me know you about the hot you mentioned | First of all, The rework machine is the BGA3500 (manufactured by 0.k international:U.S.A) | ��DESOLDERING HEAT :OVER 200��(CENTIGRADE),30SEC(CHECKED
Electronics Forum | Thu May 05 09:46:04 EDT 2005 | davef
Board fab, Defects, Pad coatings, Gold black plague articles 1 Nick Biunno's article: http://www.nukcg.org/downloadfiles/Hadco%20on%20Immersion%20Gold%20failures.pdf 2 George Milad's article: http://www.circuitree.com/ct/cda/articleinformation/featu
Electronics Forum | Wed Oct 11 16:25:04 EDT 2006 | realchunks
Board fab, Defects, Pad coatings, Gold black plague articles 1 Nick Biunno's article: http://www.nukcg.org/downloadfiles/Hadco%20on%20Immersion%20Gold%20failures.pdf 2 George Milad's article: http://www.circuitree.com/ct/cda/articleinformation/featu
Electronics Forum | Fri Oct 09 13:37:55 EDT 2009 | tstrat
We are seeing similar issues. We have a board that consistently has failures on a BGA part. After SEM/EDS it was shown that the fractures were occurring between the Ni-P and Ni-Sn intermetallic in the ENIG finish. The element map showed elevated conc
Electronics Forum | Mon Oct 12 08:07:45 EDT 1998 | Earl Moon
| I have datas to substain that a not wetting PCB ( the HAL oxided or not uniform in thickness )if soldered in reflow, it shows voids with X-Ray inspection.The voids are in side all the joints not only on the solder pads levell. | | Is there a techn
Electronics Forum | Thu May 07 20:28:35 EDT 2009 | davef
From our notes, the following is a series of snips from: "Copper Dissolution in Tin" LJ Turbini, PhD, adjunct faculty member, University of Toronto, Materials Science and Engineering, SMT 2/07 As the solder becomes molten, copper from the board diff
