Electronics Forum | Wed Sep 17 05:41:16 EDT 2008 | ralphspm
Can Fuji machines such as IP1 and IP2 utilise 2mm pitch feeders provided by Hover-Davis? Has anyone used them on an IP1 or IP2, and if so were they effecient? Does anyone have 2mm pitch feeders that utilise an Fuji IP1/IP2, for sale? We are currently
Electronics Forum | Sat Jan 15 14:38:23 EST 2000 | LC
You can also try calling Universal. I don't know what the situation is like in the States but we can't get the Multi-pitch feeders directly from Hoover-Davis here because of contractual agreement between Hoover-Davis and Universal. LC
Electronics Forum | Fri Jan 14 15:46:50 EST 2000 | g cronin
is there any tape feeders for the GSM that have adjustable pitch and/or width?? I thought I heard of a "Universal" Universal feeder.. If so what is the part numbers thanks
Electronics Forum | Wed Jan 08 14:18:34 EST 2003 | soupatech
I have run across a resistor array whose tape has a 2mm pitch. Is there a way to modify a Fuji CP3 8x4 feeder to make it 8x2? Or do I need to purchace new feeders?
Electronics Forum | Sat Feb 02 09:53:49 EST 2019 | slthomas
Commponent pitch programming is performed via the buttons on the feeder. I don't remember enough to walk you through it but there are people here that do - I'm sure you'll get some help shortly. If not, go to http://www.precision-repairs and use th
Electronics Forum | Fri Jan 14 16:22:05 EST 2000 | JAX
The feeders that you are probably refering to are made by hoover-davis. They only have adjustable pitch( electronic ). You probably will not find a universal feeder that has adjustable width. This is because the guide track is positioned on the left
Electronics Forum | Fri Feb 01 18:23:30 EST 2019 | slthomas
Is it indexing at the correct pitch when you push the forward button? I really can't remember much about those machines but it seems like that's an indication that it's not programmed correctly. I'll be bobpan knows, regardless. ;)
Electronics Forum | Sat Feb 02 04:48:30 EST 2019 | dfl
yes it's moving at the wrong pitch, about 3 components a time. Is the programming you talking about at the microcontroller AT85C55 or that serial memory 24C04? Or there is some procedure on the Quad to adjust this?
Electronics Forum | Tue Jan 14 11:02:59 EST 2003 | soupatech
I found a feeder with a 2mm pitch and was told that although it was made for the CP4, it would work with the CP3. Before we throw out a thousand bucks, has anyone had experience loading parts off of a 2mm pitch tape with the CP3? The part is a 1.6
Electronics Forum | Mon Oct 05 21:05:32 EDT 1998 | Stefan Witte
Most of the older placement machines might not have a 2mm advancing feeder. Here is how I get by picking from a 8 mm feeder without loosing every second component. 1. Define a second component in the BOM. 2. Define this component in the feeder set up
