Electronics Forum | Thu Aug 13 16:46:13 EDT 2009 | snsmt
Hello Everyone, I have noticed that everytime that we have ran a PCB with fine pitch components (or even 0603s), there are little white strands on the leads or on top of the components. It occurs on both lead and lead free solder. We usually soak
Electronics Forum | Thu Oct 28 11:50:11 EDT 2010 | phase1
We are having a little trouble with what appears to be a crystalization between our fine pitch parts. The problem appears after a a thourough wash of the pcb when dry. It looks like lead wiskers/haze between the joints.We are using water soluable lea
Electronics Forum | Fri Aug 28 05:07:59 EDT 2009 | sachu_70
Do you clean the stencil manually or using the automated under-stencil cleaner on your Printer (recommended)? 1. Ensure that stencil wipes are lint-free and soaked sufficiently with solvent before use. 2. If your printer supports automated cleaning
Electronics Forum | Fri Aug 14 08:01:25 EDT 2009 | davef
So, in order to understand your issue better, please * Tell us more about your process [eg, process flow, machine setting, measured temperatures, etc] * Tell us more about your materials [eg, board, paste, etc] * Describe the extent of the problem [e
Electronics Forum | Wed Apr 11 11:02:53 EDT 2001 | dave
Hi I found it's hard to attach thermocouple on profile board at fine pitch component by high temp solder. Does any one know the good way to do it? Thanks in advance. Dave
Electronics Forum | Mon Oct 02 16:31:17 EDT 2000 | Larry
I have seen people take old stencils and cut out land patterns, place the component over the land pattern and use a orange stick to move the leads back into place.
Electronics Forum | Wed Apr 11 11:40:44 EDT 2001 | gcs
High temp solder is the best, but your profiler manufacturer will have some type of adhesive. I know KIC does.
Electronics Forum | Wed Apr 11 17:15:54 EDT 2001 | davef
More often than not lately, we use Al tape [like Brian W mentioned in a recent thread].
Electronics Forum | Tue Apr 17 09:19:11 EDT 2001 | Terry Burnette
Dave, I use Dexter Hysol epoxy 9340 gray. It's a two part epoxy kit. Thermally conductive and electrically insulative. Cures in about 10 minutes at 100C. Terry
Electronics Forum | Thu Sep 07 10:39:34 EDT 2006 | vicknesh28
Can u elaborate on the bad plating? Have u had any experience on this before? The component has 90/10 Tin lead plating
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411