Electronics Forum | Thu Apr 20 01:58:15 EDT 2017 | rob
Personally, I try to keep them to a minimum, as if we put conveyors between the SMT machines I find less effort is made on automating awkward components - it's so easy to add a hand fit operation. We run Loader-Printer-Conveyor-3xSMT-Conveyor-Oven
Electronics Forum | Thu Apr 01 05:19:04 EDT 2021 | micropak
Thanks for the tip. I have the old belt and since it is too damaged (Steel wires showing up here and there)that measuring the length is probably not possible. I can however measure width and tooth pitch. I will give it a try. I have also requested A
Electronics Forum | Tue Oct 31 19:28:24 EDT 2023 | ttheis
We built our own coating system by mounting a Universal Robots UR5 to an edge conveyor between a magazine unloader and magazine loader. The robot has a needle dispenser on the head. We chose a needle dispense process to avoid aerosols and complex ven
Electronics Forum | Fri Oct 24 13:35:11 EDT 2003 | cnotebaert
Ok, I have been trying to purchase a magazine unloader (front of line to load brds into smt equip) from 3 different used equipment manufacturers. I have been hounding them for 4-5 weeks to get me a quote. They all tell me they have them but I have no
Electronics Forum | Wed Jan 09 11:14:39 EST 2002 | stefwitt
I wished, I would get a job like that. Malta is a nice spot! With 1500 Cph you can select any machine on the market, but here are some questions. If you use a glue machine you apparently deal with mixed technology boards. If your volume is that low,
Electronics Forum | Thu Dec 14 21:10:42 EST 2000 | Jeff
elfego, i used to wwork at a place with the following line layout: * Loader * MPM Hi-E * Triscan Solder Inspection Machine (affectionately called the "Trashcan" by the technicians ;-) * 2 Phillips FCM fast chip mounters * 1 Phillips Topaz "hybrid" (
Electronics Forum | Fri Aug 25 18:27:45 EDT 2000 | Dave F
who makes the best conveyor?? - g cronin 10:50:56 05/15/2000 2 One used conveyor supplier is => Tech-Mation International 952 Alton Parkway Irondale, Al 35210 205-833-4277 (fax) 4377 Phil Higgins, Mathew Bennett (sales) Eric Ford (sales) tiusa@bell
Electronics Forum | Wed Jan 09 08:36:13 EST 2002 | marquesj
For Pick & Place machines you have Siemens Machines, visit - http://www.siplace.com They are good machines and they have a nice support For loader and unloader you have Nutek visit, - http://www.nutekholdings.com/A5581E/hpage.nsf/Main!OpenFrameSet
Electronics Forum | Fri Mar 06 01:35:23 EST 2009 | exsydeco
I am a service engineer. Specializing in YAMAHA machines. It is call Philips/assembleon in the europe. I am from Malaysia. Back here, engineers that work in SMT field basically have to know the all machines in the production line. Start from Loader
Electronics Forum | Fri May 12 03:41:03 EDT 2017 | pmcg
Contact Dan Trinka at http://www.4techusa.com he > should be able to help. > > He is great when it > comes to the UIC stuff. We tried 4Tech but unfortunately they didn't have the code for the correct 5423A version. Programmed a couple of PLC's wi