Electronics Forum | Thu Jun 11 06:57:22 EDT 2015 | cyber_wolf
Linux, The amount of error that you are describing is about the thickness of a human hair. Unless you are placing 0201's I can't understand why .12 is an issue. There are many factors that can effect placement accuracy on a CP6 For instance: 1. M
Electronics Forum | Fri Sep 22 11:52:47 EDT 2006 | basem
Then Fuji it is. I'm happy with the features the Juki's R seriers are giving out. It is like, everything I could think of a placement machine if I would design one for myself...the 2060R is something I would buy happily...especially after you telling
Electronics Forum | Wed Apr 12 06:40:11 EDT 2006 | aj
All, I continuosly have reliability issues when placing a SOT363 device. I have Fuji CP6 and CP4 placement machines. The part data has been analysed down to the finest detail but it is still hard to maintain any consistency. Anyone else have simi
Electronics Forum | Wed Jul 11 14:08:21 EDT 2001 | markhoch
Are you guys providing adequate board support during glue dispense and placement? I've had this same problem with 0603's that I was able to correct with adequate board support. Also, if you're using a Fuji glue machine, what are your temperature sett
Electronics Forum | Fri Apr 27 13:04:35 EDT 2007 | rmitchell
Hi, I am having some problems with my Fuji CP6 placement repeatability. The placement drifts during the build about .06-.10 mm on parts. It has happened on several different builds this week. It is enough to cause some defects after reflow on smal
Electronics Forum | Fri Jun 30 20:59:04 EDT 2006 | johnwnz
Folks, who uses MYData's?.... In a previous life I was a fuji man and liked them I have to say, they were big n heavy and you could drop them from a plan and they would still work... well till they brought out the QP's but lets not go there. I did ha
Electronics Forum | Thu Sep 21 20:37:21 EDT 2006 | basem
Does anyone on this forum has experience with any of i-PULSE SMD placement systems? I am looking at the M4e. Also, can someone advise me on what to choose if the desired final circuit is of very high density and small pitch (0.5mm)? I am considerin
Electronics Forum | Fri May 29 03:27:36 EDT 2009 | grantp
Hi, I have only handled MYDATA and Fuji personally. MYDATA was not realiable, Fuji's are perfect. As for feeders the XP series, we have 5 of them, and they all use the same feeders as the older machines such as CP and IP series. The XP can even use
Electronics Forum | Thu Mar 20 07:58:12 EDT 2008 | cyber_wolf
#1Run a Fuji gold board and see if the problem persist. Is your board clamp slipping? Fid camera tight? etc.. To see if you have a Y axis positioning problem: 1.Put the machine in mecha check 2.Go into Y-axis 3.Place a dial indicator so that the st
Electronics Forum | Mon Mar 24 22:46:53 EDT 2008 | crashoveride
Don't try the mecha check yet unless you know how. have you checked the coupling shaft of Y-axis? If it's ok, take a look at the ball screw if it looks like being scratched or something unusual. Also, observe the movement of the machine if you hear a