Electronics Forum | Wed Aug 08 15:31:30 EDT 2001 | johnw
Hi folk's, I'm looking for some hint's here. Got a board from the customner that is ceramic, and it's 2.2mm thick. I've got a couple of RF connectors that I need to solder, problem is I can't get any flow up the PTH's. The pin's are gold on the conn
Electronics Forum | Thu Aug 09 16:41:12 EDT 2001 | johnw
Dave , you know it's your cheery disposoition I love.... Ok so the process: Process is Double sided reflow for SMT & PTH via the wave. Like I said or did I, I forget and can't check back...it's a spray fluxer with noclean mutlicore NR3s-06 water b
Electronics Forum | Mon Sep 03 03:32:47 EDT 2001 | johnw
Franky, what method are you using for printing glue? metal stencil or plastic?, and is it on contact or off contact ? and what type of squeegee's are you using? basically give us more infomation. In term's of measuring height / volume, you can do t
Electronics Forum | Mon Sep 10 16:07:37 EDT 2001 | johnw
Hi guys HELP!!!!!!!!!! I have been tasked with working out a chart to show calibration acCuracy and that my machines are in control I say to myself I know they are cause I have no misplacement of fine pitch but this is not good enough for my co
Electronics Forum | Tue Sep 11 14:16:59 EDT 2001 | johnw
Hi guys Thanks again for the help you have been a great help to me.
Electronics Forum | Mon Sep 17 17:39:24 EDT 2001 | johnw
Hi Jeff Am I correct in asumming that the dek requires different stencil designs compared to the mpm ie Take a 6th stencil and print on a dek then a mpm and the results are very diffrent The reason I am asking this is we
Electronics Forum | Tue Apr 09 07:41:08 EDT 2002 | johnw
Craig, it depend's n what you want to look at. In term's of te gran structure of the solder jont that's formed when the joint is cooling so you'd want to monitor the temperature drop from the peak or say 215dg C for ref down to probably about 150 an
Electronics Forum | Thu Apr 11 11:26:34 EDT 2002 | johnw
Dave, I sand corrected since I know you wouldn't steer me wrong...although the lst time I looked at the IPC spec for a solder profiel it was still designed for older generations of paste and were specifically water wash biased although that doesn't c
Electronics Forum | Tue Apr 30 07:49:38 EDT 2002 | johnw
shawn, define what you mean by solder ball's scattered across the board? I'd tend to agree with the thoughts of too much paste on chip's but normally your ball's would be mainly around these devices although som can move around depending on the surf
Electronics Forum | Thu Jul 11 09:55:21 EDT 2002 | johnw
Folk's, anyone ever heard of a beast called a Systems Technology International reflow oven (model 7204-6-6). I've tried searching the web but haven't found anything. Just looking for the basic's on it. cheers John
