Electronics Forum | Mon Feb 06 09:17:35 EST 2006 | Cal Kolokoy
Mike did you have these SEM'd to be able to see the IMC's within the solder joint?
Electronics Forum | Tue Jan 31 14:23:39 EST 2006 | samir
Chunks, For our lead-free eval, we had the same problem with "charred looking" solder paste up the component termination of one of the smaller discretes, coupled with excessive solder balling...this smaller part did see peak temps in the 240 range -
Electronics Forum | Fri Feb 03 16:40:24 EST 2006 | Mike
At my last employer, we ran a number of tests to make a "Hybrid" profile work (same profile Joe lists) . It worked great for everything but BGAs. The problem (6 months ago) was using parts not rated for lead free reflow temps. As the market fills wit
Electronics Forum | Tue Jan 31 12:02:22 EST 2006 | aj
how would you apply both pastes.? anyway, I have succesfully run leadfree bga with lead paste. You gotta find a profile that kinda meets both requirements. Taking into consideration the peak temp and time above. dont have details on hand but I ca
Electronics Forum | Tue Jan 31 12:13:26 EST 2006 | Calvin Kolokoy
Today's regular Sn-Pb paste chemistries are designed to run at higher peak temperatures ensuring that your lead-free alloys will coalesce with your regular Sn-Pb solder. That being said, it is do-able to solder both types in one oven. Generally, wit
Electronics Forum | Wed Feb 01 06:02:59 EST 2006 | joe
Hi, SAC BGA's in a SnPb reflow process can be achieved by ensuring the temp. on the BGA is at a peak min of 220�C and a time above 207-210�C for 60 - 90 Sec. Lower temperatures have shown incomplete mixing of alloys and some voiding.
Electronics Forum | Tue Jul 13 06:49:53 EDT 2004 | imtiaz
In one board we are using 213 SMT components out of which 23 components are lead-free and the rest are leaded. The paste used is also leaded. Do we have to make any changes in the profile of our reflow oven ? Also will there be any negative effect on
Electronics Forum | Tue Dec 08 12:44:52 EST 2020 | janwillemreusink
Who is using two sorts of tin in one selective soldering machine with to solder pots? So then the soldering program selects the correct pot (tin). What are the risks? Adding wrong tin in the wrong pot. Mixing up the nozzles?
Electronics Forum | Thu Dec 17 18:24:37 EST 2020 | SMTA-64387520
We use both in our selective soldering machine. Training is the most important concern. As long as you have well trained operators the risk is minimized.
Electronics Forum | Wed Jan 20 07:11:01 EST 2021 | janwillemreusink
Thanks for replying... Unfortunately (or not) it isn't relevant anymore. Due to the effects of covid-19 we don't have any active aerospace customers anymore so (for now) we're only making leadfree products.