Electronics Forum | Thu Jan 30 15:41:52 EST 2003 | MikeF
The easy part is to determine which parts should be coated. The harder part is making sure the parts that should not be coated do not get coated. I don't even want to think about the amount of labor and materials I've lost due to conformal coat get
Electronics Forum | Thu Aug 22 13:31:23 EDT 2013 | bvdb
Re-doing this thread as original seems to have been shortened. Our beloved 24 year old Fuji IP-1 fine placement machine won't start. Has been working fine for the past 6 years but now when the Power button is pressed the power comes on but the FAIL
Electronics Forum | Fri Jan 05 11:10:05 EST 2018 | andrewnoland17
hello, my colleague ProcEng1 is right. The main > problems are the gears, which easily are stuck > with foil, the shutter, which has to be > lubricated and not bend. Air cylinders on the > machine have to be changed if you have misfeeds > still.
Electronics Forum | Fri Jul 26 14:19:14 EDT 2019 | slthomas
Since our process engineer took off for allegedly greener pastures I've taken it upon myself to provide whatever assistance I can with the process side. In this case I'm trying to get the "2 1/2D" inspection up and running. They've never us
Electronics Forum | Sat Apr 15 00:10:52 EDT 2023 | sarason
Having worked in a hybrid maanufacturing operation many years ago, yes stencils are great and have the required accuracy, but on the down side there were 2 operators that were absolute wizzes at turning them out and that could mean up to 20 stencil
Electronics Forum | Tue Jul 06 17:10:19 EDT 2004 | Pete
Quality, consistency and labor savings all wrapped up into one nicely packaged piece of electro-mechanical marvel called AOI. Look for the number of templates one can store per component, lighting options, can it do through hole? Look at reporting
Electronics Forum | Thu Jan 10 03:19:49 EST 2008 | chrispy1963
I have read all the replies here and have yet to see this one which I know works when our fids are HASL and distorted, thus unable to seem uniform enough for the vision systems on our MPM's or MyDatas to see them clearly. Using a stainless steel nee
Electronics Forum | Wed Feb 23 08:27:14 EST 2011 | cyber_wolf
I am going to disagree with that. Our QP242 wasn't worth a crap when it came to reliably placing BGA's. The lighting parameters and the programming will have you tearing your hair out. If you are doing outline recognition on small BGA's...then maybe.
Electronics Forum | Thu Apr 11 21:20:04 EDT 2013 | dman97
Hello. I am having a problem with a CP3 machine. This machine decides every so often to kill 24v power to its self. At first I thought it was a bad 24V power supply, but I swapped it out and it still decides to occasionally kill its self. I also re
Electronics Forum | Thu Feb 19 12:22:52 EST 2015 | dman97
Hi there. I have an IP3 machine that refuses to power up the MFU cart on side 1. I have already replaced the I/O card but still no dice. Is there a relay or fuse that I need to check to get this to power up? The machine will not operate the camera
.gif)
