Electronics Forum | Tue Mar 28 19:28:54 EDT 2017 | aemery
Giao, These style of MPM's use stepper motors, but no feedback like an encoder or a resolver. In other words all axis positions are assumed after "Reset" of the machine. Because of this style of drive system there is the potential for the vision ga
Electronics Forum | Fri Sep 22 14:07:29 EDT 2006 | realchunks
I think Sr is right. Miss prints are prolly a result of your tooling moving the board after the camera looks at the fids. It also could be the camera itself hitting the board from warpped board or tooling raising the board up. It may be the camera
Electronics Forum | Thu Oct 27 13:46:36 EDT 2022 | proceng1
I concur with what Tom said. Sometimes you have to trick the machine. Without seeing your board, I can't offer any specific advice. And I am not familiar with your machine, but we run SAMSUNG machines and between those and several different MPM Pr
Electronics Forum | Fri Feb 18 09:35:10 EST 2000 | JohnW
Ok folk's so it's staw poll time...How are you storing you squeegee baldes? I've been asked / told / commanded to look at how we're storing our DEK and MPM Squeegee blades and improve it. Currently they are held in a cabinate matrix with the blades p
Electronics Forum | Fri Feb 18 09:35:10 EST 2000 | JohnW
Ok folk's so it's staw poll time...How are you storing you squeegee baldes? I've been asked / told / commanded to look at how we're storing our DEK and MPM Squeegee blades and improve it. Currently they are held in a cabinate matrix with the blades p
Electronics Forum | Wed Aug 20 20:33:12 EDT 2008 | proy
You should get yourself into DOS, and try to detemine if the mouse driver is loading properly. What .exe program do you have? I have an early touch screen unit which had SPM.EXE and functioned with a touch screen and no mouse. I have converted it
Electronics Forum | Fri Feb 08 15:00:05 EST 2019 | mattkehoe
We are very close to having the printer up and running but have hit a snag that we hope someone has seen and can offer a work around. The machine does not have the auto stencil wiper attachment parts in it. Did not matter before the hard drive crash
Electronics Forum | Mon May 17 02:06:57 EDT 2004 | johnwnz
Look here: _a class=roll > href="http://www.aimsolder.com/techarticles/tech%2 > 0sheet%20BGA%20voiding-%20reducing%20through%20pro > cess%20optimization.pdf" > target="_blank"_http://www.aimsolder.com/techartic > les/tech%20sheet%20BGA%20voidin
Electronics Forum | Mon Apr 10 09:48:43 EDT 2000 | Dave C.
John, having worked at a major U.S. telecommunications co. I can tell you we were placing through hole connectors in SMT. Using MPM printers 3000 2000 AP36 AP24. We opened the apertures on the stencil 25% over lead diameter to allow more paste(it wou
Electronics Forum | Thu Jun 18 13:56:39 EDT 1998 | No Friend Of Alpha
So my salesman says to me that we could return our unneeded Al frames from our MPM printer to Alphametals in CA for credit to be applied toward a future sale. Sonded good. So I boxed up all the damn frames (44) and shipped them off to Goofyland. Now
