Electronics Forum | Wed Jan 27 22:39:46 EST 2010 | wmeliane
Thanks for the recommendations. We have settled on the new Juki CX-1. Juki states that the machine is a hybrid between a MCM placer and an SMT placer. This machine, if it is capable to do what Juki says it can do, is exactly the machine we need. Ma
Electronics Forum | Wed Feb 25 12:36:18 EST 2015 | Svajunas Astrauskas
Our company have Mydata MY100DX mashine. When assembling project it lags. Assembling - several seconds thinking (sometimes till 10secons) - assembling and this problem repeats all time. When button is pushed it sometimes reacts only after 1-10 secon
Electronics Forum | Thu Jul 09 11:12:43 EDT 2015 | quaker332007
We have a mydata MY100DX and A Hover-Davis label feeder. I'm have issues picking up the label. The machine will place it fine for a few then stop and refuse to pick up the label. Is anyone using this configuration and if so do you have and points
Electronics Forum | Wed Aug 05 09:41:50 EDT 2015 | kmots15
For upside down and rotated parts try using the index mark (F6) in the package database for that component, at least then the machine should look for a unique feature on the bottom and if it cannot find it the part will be rejected. For the index ma
Electronics Forum | Fri Mar 24 16:45:11 EDT 2023 | smtusa
Yeah laser centering didn't sound as reliable to us either. I have heard jokes about mydata but wasn't sure if they were serious. It seems like they have a huge following in US esp when compared to Yamaha/Assembleon. Did anything improve when they
Electronics Forum | Fri Jan 05 16:16:51 EST 2024 | mistrthou
Based on the my15 we used to have and our current My100's I'd say it lost the position of the tool bank. Is it Hydra or Midas tooling? Uninstalling and reinstalling the hydra tool bank is fairly easy. If it's Midas tools, does it fetch other tools
Electronics Forum | Fri Jun 23 09:01:01 EDT 2000 | Dave F
Gary: According to what I was try to say, you have read me correctly. NOW ... I would not pay much attention to my 100�C delta T babbling. It is in our work instruction for setting-up the wave, but no one pays attention to it. And I, nor anyone e
Electronics Forum | Wed Jan 27 11:22:51 EST 2010 | fredc
Hello TQS, We have made Micro Mechanics adapters for Mydata. The Micro Mechanics tips are used in die bonding machines. I have no doubt that an adapted nozzle would hold your die securely. From Grants posts in the past, he had problems with placement
Electronics Forum | Tue Feb 28 12:29:20 EST 2012 | richieoreilly
Hi All, I am currently looking at purchasing an SMT machine with 01005 and flip chip capability, We have a limited budget but have found some machine which may suit. Mydata MY100LX10e Fuji NXT, 2nd hand 2007 vintage, Yamaha YS12F Do any of you ha
Electronics Forum | Wed Feb 25 15:16:56 EST 2015 | dyoungquist
We have MY12 and MY15E machines. I am going to assume what we are seeing also applies to the MY100 series machines as well. Do you have the electrical verifier option that works with the midas head and centering jaws to check component values of
