Electronics Forum | Fri Aug 12 09:49:19 EDT 2016 | deanm
In general, smaller objects heat up faster than larger objects because they are lower mass. For example if you heat up one liter of water in pan and two liters of water in another pan with the same heat energy applied, the smaller mass will heat up f
Electronics Forum | Wed Mar 20 16:10:27 EDT 2013 | woodsmt
Most pots have a drain system, but that is a scary thing to use. I have seen places that have plumbed it nicely with ball valves and such to control the flow into small containers, but still fraught with danger. I use small metal bread pans. I lad
Electronics Forum | Tue Sep 27 20:10:17 EDT 2005 | davef
Use "Bakers Secret" Teflon coated loaf pans to make the nicest solder ingots that you have ever seen. We hope you are using the term "draining the solder pot" euphemistically. Using the drain on the bottom of the pot is dangerous. [Too much can go
Electronics Forum | Thu Feb 23 18:36:29 EST 2006 | Chris
Do you want some coating for aluminum? If so here you go. Nordic Ware Hwy 7 at 100 Minneapolis, MN 55416 Phone: 952-920-2888 - Fax: 952-924-8621 Toll Free: 1-800-328-4310 ext.642 These guys charge about $200.00 per lot. You can coat with Silve
Electronics Forum | Mon Feb 27 09:31:30 EST 2012 | pauld
Hi Dave, Picture a camera mounted on top of a fixed base that pans 360 deg. back and forth. The motor connects through a circular slip ring board with brush connection. The rings are hard gold and the typical brush material is soft. Unlike the armatu
Electronics Forum | Fri Feb 03 12:53:19 EST 2006 | MazinK
Hello BobPan, I sent you a message yesterday ! I was wondering !did you get it regarding QSV 1 Plus. Please Advise!
Electronics Forum | Thu May 26 14:27:38 EDT 2005 | dggjr
There are definately patents in force for many feeder assembies. Specific mechanisms like waste tape take-up and sprocket indexing are covered by several patents. Fuji, Pan, Yamaha all have patents on the various aspects of their feeders. Best of
Electronics Forum | Wed Oct 05 08:42:59 EDT 2005 | jdengler
Just be prepared! Once you open the drain you may not be able to stop the flow. Be sure that you get as much as possible out then have several pans empty and near by. On some pots it will look like there is very little left but you don't see it a
Electronics Forum | Wed Nov 08 09:11:28 EST 2006 | Amol Kane
Hi Davef, do you have the paper you reference? Pan, et al. (IPC/JEDEC, San Jose, 2005)? if so, will you be able to send it to me? akane@harvardgrp.com Thanks in advance Amol
Electronics Forum | Thu Dec 28 21:49:29 EST 2006 | davef
How cute is that? We and Earl Sir Moonbeam were using those electric fry pan 'hot plate' things years ago. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=10155 Haters, turn down the volume.
