Electronics Forum | Fri Jan 28 04:03:51 EST 2011 | grahamcooper22
Print then dispense in the areas you need extra paste. Why can you not use a stencil which has areas etched away around component patterns to thin the stencil down....for example a 150 micron thick stencil etched to 120 or 100 microns in specific are
Electronics Forum | Thu May 14 01:14:08 EDT 2015 | m_imtiaz
i want to know what is the ideal viscosity of solder paste before printing. i have brookfield viscosity meter with Spiral Spindle.
Electronics Forum | Fri Mar 29 10:11:02 EDT 2019 | cyber_wolf
“For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of
Electronics Forum | Wed Jun 01 07:34:19 EDT 2005 | davef
It's unusual to use a horseshoe shaped pad for a 0805. Commonly when people want to reduce the paste volume to reduce solder balling, they print a "home plate" aperature. We print paste 1:1 with the pad. �IPC-7351 LP Wizard� is the library mainten
Electronics Forum | Thu Apr 03 22:56:48 EDT 2008 | davef
Potential impacts of using expired solder paste are [University of Bolton]: * Changed paste rheology. Result: poor print quality * Loss of solvents. Result: reduced flux activity * Changed flux formulation. Result: More difficult to clean flux residu
Electronics Forum | Wed Apr 14 08:15:18 EDT 2004 | arcandspark
We have tried other stencils with different size openings but this company will not allow us time or money to run any experiments to define stencil criteria and printer settings, its just run, run, run. They really dont care about post reflow yields.
Electronics Forum | Thu Dec 16 18:36:01 EST 2004 | mattkehoe
We use water soluble solder paste. When it gets a little dried out, can we add something to rejuvenate it? Liquid flux? We do not place components, just print and reflow the solderpaste so solderballs, spattering, and other issues like those are of
Electronics Forum | Fri Dec 17 08:05:00 EST 2004 | davef
Your solder paste is talking to you, follow its message. Listen to the paste. Be at one with the paste. If you insist on ignoring the message of the paste, add more paste, if you just need to complete the last board or so, but you really should ju
Electronics Forum | Mon Apr 12 15:52:12 EDT 2004 | wgaffubar
I am using Indium 92J type 4 solder paste due to a BGA site with .008" pads and stencil opening of .009" square and .005" stencil thickness. When I try the type 3 we get insuffecient print. The aspect ratio tells me that I should be using a type 4. T
Electronics Forum | Tue Apr 13 14:14:59 EDT 2004 | russ
I have actually printed this same condition with type 3 paste Alpha WS709. I posted this for discussion and cannot remember what I called it. We did need to clean the stencil after every three prints. I did not check volume on these locations but
