Electronics Forum | Fri Aug 16 10:00:03 EDT 2002 | davef
You have a very bad situation. It�s tough for the gas, flux material, er whatever to escape when the BGA is sitting on top of it and the blind via is blocking it from the other side. Obviously the vias should have been: * Placed on the edge of the
Electronics Forum | Fri Jun 16 11:37:15 EDT 2006 | docker
I�m working in Solder paste manufacturing industry and my customer has complained the void issue on BGA pad. I�m internally conducting the void test on BGA pad in my Lab. I used OSP furnish board with Sn/Pb and /or lead free component using Lead free
Electronics Forum | Tue Mar 22 11:20:56 EDT 2011 | jercole
NEED HELP!!! I am getting solder splatters on my panels. We produce 100's of different kinds of product and this is the only one that is leaving solder splatters all over the masking. It is however the first time we have used 40 pin QFN's. I don't th
Electronics Forum | Thu Jun 10 19:20:59 EDT 2021 | kojotssss
Hi, Too much paste on grounding pad. Looks like also doesnt have path for gases, for void escaping.
Electronics Forum | Thu Apr 17 13:35:49 EDT 2003 | davef
A-610 talks to acceptable voiding.
Electronics Forum | Wed Apr 16 11:20:31 EDT 2003 | russ
What was the original complaint? when you say solder wicked onto top of capacitor do you mean it was dewetted from the board and only on the cap? What type of device showed voiding? how bad was it 20%,50%? I have found that the paste type seems to
Electronics Forum | Thu Jan 14 23:49:00 EST 1999 | Wirat Sriamonkitkul
I saw the problem of void in solder bump or in lead less component or some BGA. But I didn't have standard specification of that void is accept or reject? Do any body have the better idea or suggestion of the criteria ? Thank you, Wirat S. / Jan 15
Electronics Forum | Thu Apr 17 10:38:02 EDT 2003 | davef
While Russ is correct that a little voiding is OK, your level of voiding [customer complains that the solder surface looks bumpy] doesn't give us the ol' warm and fuzzy about their process control. For background: * Search the fine SMTnet Archives.
Electronics Forum | Tue Mar 06 14:10:52 EST 2001 | CAL
Are the voids in the balls of a BGA? Are you verifying this through x-ray if they are? some voids depending on size and location are some what accepted. Solder paste type? Solder paste date code? Humidity high? PCB's been stored in a truck trailer?
Electronics Forum | Fri Feb 25 04:28:49 EST 2000 | Sze-Pei LIM
We faced terrible void issue while using Sn96.5Ag3.5 solder paste, more than 20% void. We tried adjusting the reflow oven profiles but we did not have much success in reducing the void. Generally, we find quick preheat, high peak temp. and fast cooli