Electronics Forum | Thu Jul 25 21:58:20 EDT 2002 | davef
How do you �physically remove the solder from the fiducal prior to disposing of the balance of the rail�? We don�t HASL our fiducals. Easier to see with vid head. If you need to HASL your fiducals, consider: * Disposing of the rails with your scra
Electronics Forum | Sat Jun 05 09:24:40 EDT 2010 | dekhead
As stated, that error relates to rail lifted sensord (L & R)... Machine is perceiving that something is causing rails to lift at inappropriate time. You can monitor sensor status in Rising Table diagnostic to see that they are toggling appropriately.
Electronics Forum | Wed Jun 16 08:16:27 EDT 2021 | shmevan91
Hi, Could anyone shed some light why a mk5 13 zone heller ovens rail width won't auto adjust? has to be done by hand every time we change product. The board support rail will adjust just not the main rail, have tried swapping the two cards around bu
Electronics Forum | Thu Jun 19 09:33:09 EDT 2008 | stevenvl
Hi, I'm having issues with boards sticking/jamming along the line, as well as what seems to be excessive wear along the guide rails. The boards are an Alumina Ceramic material and the rails differ by machine, but include anodized aluminum, steel, de
Electronics Forum | Tue Jul 30 17:42:47 EDT 2002 | davef
There's a lot of �5v op amps out there, but if you look there's some 5v rail to rail op amps also. here's one: http://www.aldinc.com/ALD1702.pdf
Electronics Forum | Wed Sep 17 07:39:13 EDT 2003 | davef
As we recall, they attached something like a placement vib head to the rails. The problem, as you stated, was isolating the board from the vibrating rails during cooling of the solder connection.
Electronics Forum | Fri Feb 27 12:06:03 EST 2004 | jseagle
A 20 x 20 frame with the image centered will drop in IF you have a printer with adjustable rails for the stencil, the rails move in and out to accomodate 29 x 29 to smaller than 20 x 20. Otherwise, you will need the adapter. James
Electronics Forum | Tue Apr 25 12:01:17 EDT 2006 | daxman
Just thought I'd post and let you all know, SMT Research helped me identify the issue here. Turns out it's the outer moveable rail on the XY table. The clamp bracket brakes were in bad shape, and the outer rail was slipping.
Electronics Forum | Wed Jan 17 21:19:08 EST 2007 | Jnet
I believe the drive of the conveyor whether rail or belt is the same so the sprocket choice in the software would effect belt or rail conveyor speed. I would make sure the number of teeth match the sprocket selection in the software.
Electronics Forum | Fri May 11 16:29:51 EDT 2007 | anthony
Novastar is JUNK, that is why you cannot get repeatable results. Check the conveyor rails, you will find they are warped. Novastar uses cheap, non-machined rails. Straight from china or india. Their stuff is garbage. Best to swallow the loss and star
