Electronics Forum | Wed Sep 22 13:49:47 EDT 1999 | Claude Couture
The machine is a Universal 6796 DIP inserter. The driver card for the X axis burned a couple of resistors and a trace, probably a couple of power transistors too. I had a spare card and put it in. Now on powering-up the machine, the X-Y table move
Electronics Forum | Tue Sep 21 13:00:04 EDT 2004 | Bob R.
We found a simple solution to this dilema. We told the QC department that we (manufacturing engineering) would be happy to give them control and that we would make no changes to an x-ray algorithm or pass/fail limits without them being on site and g
Electronics Forum | Mon Dec 26 12:58:17 EST 2005 | davef
As an alternative theory to the boards being damaged in the wave soldering process, it's possible that the panels are being handled in a way that flexes the panel and breaks the capacitors. In this possibilty, we'd expect capacitors in specific loca
Electronics Forum | Fri Mar 07 20:52:51 EST 2003 | Neil
With any kind of statistical study you must have some limits to which you can measure against. The whole purpose of generating a CPK is to ensure that the equipment under observation can meet these limits when used under normal operating conditions.
Electronics Forum | Wed Oct 03 05:32:20 EDT 2001 | dwoon
Hi Doug, How about the active placement area? Will the placement area be limited below 27" x 23"? Thanks for your clarification.
Electronics Forum | Wed Mar 06 10:24:32 EST 2002 | Charlie
Here our senerio: * There are no funds for additional test equipment. * Have only Delta Scan results, that are very limited. * Failuer of Delta Scan, PCB goes to vendor for X-ray analysis. Do you have a similar process and do you do anything diffe
Electronics Forum | Wed Apr 30 09:13:30 EDT 2003 | pjc
Yes, there is a limitation with Transmission X-ray on double-side SMT boards, ie.: back-to-back solder joints, components on bttom side over a solder joint.
Electronics Forum | Fri Jul 29 08:22:34 EDT 2011 | mskler
What will be the specifications of solder paste printing for 6 mil thikness in SnPbAg process. Also what will be the control limits fro X bar R chart. Thanks in advance for the help
Electronics Forum | Mon Mar 05 21:55:59 EST 2012 | vinitverma
Please describe the problem in a bit more detail like what is the size of the components in both the charges? It is possible that the size is a limitation here. What nozzles are used for all the 8 components in the component information?
Electronics Forum | Thu Jun 12 00:20:41 EDT 2014 | jasmine01
How to limt my Cisco WS-C3560X-48T-S switch port to 128kb which running 12.2(55)SE3 ? Could anyone help with the IOS commands needed to achieve this ?