Electronics Forum | Wed Apr 02 17:52:41 EDT 2008 | fsw
Sr. Tech, We have a IP III on one of our lines. We were hand placing an Samtec SMT connector MMT-108-01-T-DH series. I asked our SMT tech to get the IP to place it & he said we need tabs on the connector. So we got the "tab" version. Now he is not a
Electronics Forum | Wed Oct 29 18:18:34 EDT 2014 | jorge_quijano
Hola Grayboard, I've had the same situation with these components, I changed the stencil apertures a little bit and use a stepped stencil (5-6mil), after some trials we were able to get decent yields, but we still had some failures, what we discover
Electronics Forum | Tue Jan 14 17:22:16 EST 2020 | emeto
Avillaro, would you say that vapor phase process was selected, because the boards are so thick and heavy? I would assume so. Have you ever tried to run them through reflow oven? To understand better your challenge, we need to understand the setup be
Electronics Forum | Wed Jan 15 10:31:55 EST 2020 | emeto
Having 10c thermal differential is a lot. Trying different paste might help - usually thermal expansion makes component detach from PCB, then joint is formed and solidified, then component goes back but is too late to form a joint. Cooling speed migh
Electronics Forum | Wed Sep 30 21:48:13 EDT 2020 | kylehunter
> If you could change the design, a 2x25 1.27mm > pitch surface mount connector is a standard part > from Wurth. Samtec also do versions in any pin > count you might desire, with locating pins, > without, with picking clip etc.
Electronics Forum | Mon Jul 26 17:04:14 EDT 1999 | JohnW
| | | | Despite the goodness of Dave F. and George Verboven, I was unable to find the damned single pin connector. As a last attempt, I've draw it (see the link) | | | | If somebody knows where can buy it, please help me | | | | (and sorry for to
Electronics Forum | Mon Nov 17 11:09:56 EST 2003 | Frank
Hi, I have a soldering problem with a header SMT straight single row of 8 pins. It's a samtec #TSM-108-03-T-SV-P (P&P). The first problem I have is an allignement one. I do not use alignement pin for now but I expect to use it. Concerning solder
Electronics Forum | Fri Oct 03 10:24:17 EDT 2008 | chineechooze
I have a problem with placement repeatability and accuracy on this Samtec connector. The customer wants to use a "nubbed connector" which has to be placed in the corresponding PCB holes. When the nubs miss the holes, the part becomes "lifted." SEE
Electronics Forum | Wed Jan 08 16:27:11 EST 2020 | rmitchell
We have a PCB with the dual sided connector that slides on from the edge and has leads on the top and bottom sides of the PCB. It has 20 leads on each side of the PCB with with about .8mm pitch. The PCB also has a gold grounding strip on the edge fo
Electronics Forum | Tue Jan 14 11:53:44 EST 2020 | avillaro2020
Hi Phil, thanks. I am successful using the same connector on small thinner boards 2-2.5kg) i cant make it work, tried all kinds of profiles with vapour phase but to no avail. Yes you read it right 4.3-6.3mm pcb thickness and 2-2.5Kg. And it is 44 lay
