Electronics Forum | Mon Oct 30 04:43:41 EST 2000 | G. English
I have just recently finished 'experimenting' (perfecting ,if my boss reads this), with this process, and can finally say I have cracked it! There are many pitfalls (some of which I am still hurting from), send me an e.mail and I shall elaborate furt
Electronics Forum | Thu Oct 12 09:48:05 EDT 2000 | John Thorup
Actually they are complimentary. SMOBC describes how the solder mask shall be applied (but not the type, surface finish, color, etc). The other terms describe the type of surface protective finish applied to the solderable surfaces. You need to sp
Electronics Forum | Wed Feb 14 14:17:41 EST 2001 | Glenn
Does anyone know of any vapor phase oven manufacturers? The application requires bonding a 3-D object at various joint surfaces using eutectic solder. The vapor zone shall require approximately 10 inches of height. The available SMT vapor phase ov
Electronics Forum | Thu Jan 08 23:14:53 EST 2004 | danhui888
Hi James, My name is Danny Hui from VS Solution Singapore. Provide me your direct email and I shall forward the picture of your requirement. Regards Danny Hui li1266@singnet.com.sg
Electronics Forum | Fri Jan 02 05:33:02 EST 2004 | p.LAKSHMANAN
1.Can stencil be considered in Tool Management? If so what shall be the criteria? Is there any study conducted on Stencil Life. 2.Any footprint is available for Feeders in tool management.
Electronics Forum | Thu Sep 01 13:48:08 EDT 2005 | cyber_wolf
Ya!... You tell em' Steve... Whats the matter with you guys?......always with the hijinks. There shall be no humor in the forums. It is highly illogical.
Electronics Forum | Tue Oct 11 15:30:28 EDT 2005 | Dave
Hi Jerry, I thought the same so tried running other programs that are known to work on the IP-3 but still no joy. I shall try Alan's suggestion with cleaning the linear scale and see what happens. Thanks!
Electronics Forum | Fri Dec 02 08:10:25 EST 2005 | Amol Kane
Davef and russ, thank you for your input The kester was selected due to a management decision, I shall recommend that other solder be tried out as well. davef, i'll try out the soldering iron......and also look for the green tint (didnt notice that
Electronics Forum | Mon Jun 12 14:33:40 EDT 2006 | pjc
IPC spec is V-score shall not be more than 1/2 board thickness. They should be V scoring 1/4 off top and 1/4 off bottom equally.
Electronics Forum | Fri Feb 02 10:16:27 EST 2007 | tglenn
IPC standard 2221A for board design specifies that through hole leads shall be mounted such that there is only one lead in any one hole. Does anyone the reasons for this requirement?
