Electronics Forum | Thu Apr 15 08:21:47 EDT 1999 | Terry Keen
| We process both tin/lead plated boards and gold plated boards in our surface mount group. I have used Sn62/Pb36/Ag2 solder paste on all gold plated boards to help prevent gold scavaging. To reduce the amount of different solder pastes we have to
Electronics Forum | Fri Oct 02 11:23:08 EDT 2009 | floydf
Does anyone out there have experience soldering > with Pb solder (Sn 63 or Sn 62) to SAC 305 coated > PCB lands (about 50um) or Sn-Cu plated lands > (about 10um). I know soldering Pb free (Sac based > soler) to Pb/Sn coated lands is a no-no, but
Electronics Forum | Tue Aug 30 09:24:08 EDT 2005 | Slaine
we manufacture a range of ceramic parts that have silver termination,there is already a small leaching problem (absorption of the termination by the solder in liquid form)with Sn62 that we live with, having to implement unleaded solder they are norma
Electronics Forum | Mon Nov 14 10:10:52 EST 2005 | davef
When soldering your full tin (no lead) and Pb95/Sn5 solder components, you need to modify your PbSn reflow recipe to compensate for the higher melting point of the changed solder alloy [with your Sn62/Pb36/Ag2 solder paste] on those component leads.
Electronics Forum | Wed Apr 26 10:21:09 EDT 2006 | slaine
Hi you need to dip long enough for the temperature of the part being soldered to reach about 20 degrees above liquidus of the solder. For the small parts we dip solder we had Sn62 and SAC387 baths set to 250 degrees and this seems to work best for us
Electronics Forum | Fri Jul 28 09:12:59 EDT 2006 | pavel_murtishev
Good afternoon, Profile is standard ramp-soak-spike (According to paste manufacturer requirements), paste is Almit V16L HM1-RMA, type 3, Sn62Ag2. Look here for details: http://www.yousendit.com/transfer.php?action=download&ufid=98684D1201B0F001
Electronics Forum | Sun Nov 04 01:04:04 EST 2007 | omidjuve
we are manufacturing some rf boards that works on a high frequency margins now our boards doesn't pass in impedance test and we concluded that the problem might cause by the solder paste that we are using . our solder alloy is sn62/pb36/ag2 and we t
Electronics Forum | Thu Apr 16 09:54:12 EDT 2009 | davef
We know virtually nothing about your process, but here's some guesses: * Turn-off the nitrogen * Change from Sn63 to Sn62 * Change to a low-tombstone paste * Change the thermal recipe: slower ramp, longer soak * Do a better job of placing components
Electronics Forum | Tue Dec 13 11:27:58 EST 2011 | ck_the_flip
Here's the scenario: PCB Plating: Lead free HASL, Sn100C Solder Paste used: Sn62 (regular tin/lead solder with 2% silver). Anyone see any issues with this? What are the process considerations? Anyone??? PS-9 times out of 10, I don't get answe
Electronics Forum | Tue Apr 26 07:56:12 EDT 2016 | joelperez
Hello SMTnet team, I have read before that silver content on solder joints is ok at around 2% total silver content. Does anyone has experience using SN62/PB36/AG2 BGAs on hard gold (10 micro inches) PCB surface finish? Any drawbacks? Thanks Joel