Electronics Forum | Thu Jul 15 18:07:04 EDT 2004 | dwanzek
This has been a tough one to date. Any ideas will help. Problem definition � random QFP144 part not soldering all leads. Percentage fallout is about 1-5% of boards. Usually leads, one or more, on trailing side to the direction of travel does not wet
Electronics Forum | Thu Jan 03 10:55:17 EST 2008 | davef
Q1: Can Stainless steel be soldered? A1: Yes, stainless steel can be soldered. Q2: If yes, is our normal process adequate? A2: We know nothing about your normal process. Common flux used in routine soldering will not step-up to the requirements nece
Electronics Forum | Mon Jan 31 12:24:24 EST 2000 | Dave F
Robert: Several points: 1 Dross is a mixture of various things with no "fixed" composition: � The obvious things are metal oxides mixed with metal and this can vary in color with temperature and composition - remember some intermetallic oxides form
Electronics Forum | Tue Jan 13 11:41:54 EST 1998 | Charles Czerwinski
I an interested in the methods/processes used to solder to stainless steel. Any and all information would be helpfull as I don't know much about the process. Thanks in advance. Charles
Electronics Forum | Fri Jan 04 14:17:12 EST 2008 | ck_the_flip
So, I'd have to grind the living sh#t out of my wedding ring, and then use phosphoric acid based flux that can kill a small animal in order to solder stainless steel. Cool!
Electronics Forum | Thu Jan 03 17:00:20 EST 2008 | davef
Recommended procedure for soldering stainless steel [Atlas Steels Australia]: * Surfaces must be clean and free of oxidation. * A rough surface improves adherence of the solder, so roughening with grinding wheel, file or coarse abrasive paper is reco
Electronics Forum | Thu Jan 03 16:46:10 EST 2008 | ck_the_flip
Stainless steel can NOT be soldered with the solder that is used in electronics, be it Sn63 or SAC305. I have 1st hand experience in this. Solder will NOT wet to it no matter how much flux is applied, or what type of flux is applied. Again, I have
Electronics Forum | Thu Oct 20 05:58:19 EDT 2005 | Slaine
Hi could be relaited to the thermal mass of the screw/bolt. if there is no intermatalic formed and the solder just picks off id say this is likely. the hot wave hits the cold screw and cools the solder enought to leave some behind??
Electronics Forum | Tue Nov 24 18:54:36 EST 2009 | gregoryyork
Some companies claimed their lead free solders wouldnt attack stainless steel, frankly they do and they should not be allowed to get away with these claims. Lead Free does not attack Cast iron
Electronics Forum | Fri Apr 20 03:41:50 EDT 2007 | aj
Hi All, We did not change our internal Solder pot components (stainless steel)when we switched to Leadfree Alpha SACX . Running approx: 1 year now and I carried out checks yesterday and we have some signs of erosion. Did not expect to see this so s