Electronics Forum | Wed Jul 16 11:48:23 EDT 2014 | markhoch
We're an OEM Tier 1 Automotive Supplier, (Yes, one still exists in the US), with two SMT Lines and we splice all day, every day. First, let me say, I 100% agree with Rob's comments above. Technique is everything. We use ASM SiPlace, (formerly Sieme
Electronics Forum | Thu Jul 10 17:25:57 EDT 2014 | jorge_quijano
I've seen both: Different operator using same tool = different splicing Same operator using different tool = Depends on the operator I remember some years ago I did an experiment with my 'splicers': their only job was to splice the tape, and then a
Electronics Forum | Thu Aug 07 15:27:57 EDT 2014 | tombstonesmt
We splice all day. We use sierra splice tool and their yellow splice. Technique that I found works very well is to peel back the cover tape of new reel over two empty slots (our machine detects when splice occurs and allows two empty slots without re
Electronics Forum | Mon Jul 14 12:11:17 EDT 2014 | rgduval
We used to use the Tapesplicer tool available from http://www.tapesplice.com (Sierra Electronics), in a high mix, low volume environment with MyData's (older feeders). Short review: It worked. Longer review: First, technique is everything. Splicin
Electronics Forum | Thu Apr 05 18:18:56 EDT 2007 | coop
We get our splice tape through splicetronic solutions, I recomend the double splice tape. steir also makes the double splice tape it works good for attaching strips together and also for putting leaders on the tape, if your feeders require. GOOD LUC
Electronics Forum | Thu Apr 19 14:05:41 EDT 2007 | splicetronics
More information on our SMT splicing tools, splice tapes and tape extenders can be viewed at http://www.splicetronics.com We can provide you with product samples and demo tools. Please email sales@splicetronics.com for an immediate response.
Electronics Forum | Wed Apr 19 06:47:58 EDT 2006 | QTEK Manufacturing Ltd. www.qtek.com
QTEK Manufacturing Ltd. launched a revolutionary new product last November at the Productronica Exhibition in Germany, which was the QTEK Splice Clip and Tape, which eliminates the awkward handling problems commonly associated witht the splicing proc
Electronics Forum | Fri Apr 30 14:37:59 EDT 1999 | Stefan Witte
| I am looking for a good splicing kit at a reasonable cost. Any suggestions would be appreciated. | You may want to try a product out of Germany, which does not require a tool. SMD Double Splice Tape from Steier Tesa. Tel.: 011 49 41214 730. Tesa
Electronics Forum | Thu Apr 27 08:13:02 EDT 2006 | stockley
As I recall, several years ago, Siemens was developing a tape splice detector for at least the 8mm feeders, this was coupled with a method of entering the number of components on the new reel. This in theory allowed the machine to give a warning bef
Electronics Forum | Thu Apr 05 15:50:53 EDT 2007 | Kelleyk2
Contact Innovative Manufacturing Solutions to address both issues. Smart Tweezers and Cover Tape Extenders for all sizes of carrier tape are in stock.
