Electronics Forum | Mon Jan 30 19:20:45 EST 2017 | jgo
Thanks Rob. I'm not so sure in a mass production environment that using the mount spray and kapton tapes are going to be efficient. For solder paste dispensing, any idea what is the smallest solder dot size the machine can dispense?
Electronics Forum | Tue Jan 31 19:32:18 EST 2017 | jgo
Hi Rob, So do you have to constantly remove the old adhesive and spray on new ones? Is that an automated process? Also for the kapton tape removal and application, is that automated as well?
Electronics Forum | Mon Jan 30 05:58:39 EST 2017 | rob
Hi all, > > Am new to SMT here. > > I have a very > thin laminate substrate which around 120um > thickess. Being that thin, warpage is constantly > an issue for us. > > For the solder printing part, > we have a number of problems. > > Being s
Electronics Forum | Wed Jun 17 16:19:10 EDT 1998 | Ryan Jennens
| We are facing a problem of high contamination on boards after wave soldering. We want the contamination to be under 24 ugm/inch square. We are using a no clean flux with the spray fluxer unit of wave soldering. The contamination is higher on the e
Electronics Forum | Fri Jul 13 16:45:37 EDT 2007 | losersk8er
The Contamination has proven to be pretty random, lots of stainless steel though in fact two cases in the past two days. As far as I know all machinery is cleaned regularly as well, even the stencil washer itself. The boards we make are 90% (at l
Electronics Forum | Mon Apr 26 09:46:05 EDT 1999 | C.K.
Chrys: I have checked all the basic elements of Wave solder joint formation: fluxing, preheating, and lastly soldering. For checking the fluxer, i used a product from ECD that's very similar to what you desribed called the flux-o-meter. It did a
Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef
Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept
Electronics Forum | Tue Mar 29 22:26:10 EST 2005 | davef
Ken: Sprays like you suggest are hydroscopic soaps that should be avoided. If that was the choice, we'd rather go with Russ' ioniczer.
Electronics Forum | Mon Mar 10 12:36:14 EDT 2008 | mulder0990
Does anyone know where to get Biral T&D and Threebond Spray oil other than their Web sites?
Electronics Forum | Mon Feb 19 11:36:39 EST 2001 | billschreiber
Hello Mark, I wish it were that simple so I could direct you to a particular manufacturer and stencil cleaner model. Unfortunately, there are several issues complicating the process of cleaning all these applications in one machine. First and fore