Electronics Forum | Wed Feb 05 21:03:35 EST 2014 | padawanlinuxero
On top of the feeder should be a small cover thats adjustable you need to unscrewed a little and move it forward to the pick up area this should give you enough space to cover the other component another thing you can try is check if all the feeder
Electronics Forum | Fri Apr 21 07:18:40 EDT 2023 | spoiltforchoice
I had quotes for a MY100 -14 a Juki KE-1080 and an iPulse M6ez back in 2011 and at that point all those machines were about the same price with a light feeder package. The MyData however was the only one configured with smart feeders, a tray feeder a
Electronics Forum | Thu Mar 26 11:29:31 EDT 2009 | cyber_wolf
I talked to Mydata service (briefly) 3 times. Halfway through the 3rd call it was suggested to me that we set up a service call. Times being what they are, we are not willing to go that route yet. Thankfully we are not in dire need of this machine ri
Electronics Forum | Mon Apr 28 10:42:20 EDT 2003 | lgroves
Herman, I'm betting you will get a lot of response on this one. Frankly, everybody has their favorite machine. The trick is to consider the types and quantitys of boards you will run. Sometimes, it is better to set up a load for several jobs tha
Electronics Forum | Fri Apr 01 01:26:17 EST 2005 | Marv
A couple of things.. 1) The problem is more than likely on the magazine board itself (TC2), most likely the pal chip that stores the serial number and feeder information (you could swap this with a working magazine to verify) 2) The magazine connecto
Electronics Forum | Fri Aug 19 15:45:45 EDT 2005 | DannyJ
I usually like to have all the trays use pin 1 in a certain direction. In other words, as you are on the operating side of the machine, all the pin 1's should be on the lower left of the tray. With operators, the KISS principle seems to be necessar
Electronics Forum | Wed Jun 27 11:58:42 EDT 2012 | cyber_wolf
Your tool tips are being damaged because the small x-motor is not engaging when the head is picking parts. When this happens the head overshoots and you bang the tips on the mag springs. Directly after a tip gets damaged go into the service program a
Electronics Forum | Wed Mar 07 15:38:53 EST 2007 | Michael Konrad
I know Los Angeles was not a favorite destination for many visitors but some facts remain clear: APEX Southern California featured 446 exhibitors in 161,400 square feet of exhibition hall. APEX Southern California had a total of 5,087 verified at
Electronics Forum | Thu Jan 13 09:00:42 EST 2005 | fasst1
Grant, Again, just my .02 worth. I would have to agree with Greg as well. Two Flex machines from the same vendor will give you much better line balancing, and I think better overall capability than adding a different type of 'animal' chip shooter
Electronics Forum | Tue Jan 28 16:34:34 EST 2020 | spoiltforchoice
I genuinely think component verifier on the machine is the optimum solution. Even then it can probably get caught out, we build some instrumentation that can have 10K 1%, 10K 0.1% and 10k 0.1% 2ppm, a verifier won't catch those getting mixed up,likew
