Electronics Forum | Fri Jul 16 08:14:15 EDT 2010 | vetteboy86
We're expereincing issues in our pick and place machine due to what I consider a server warping of the PCB. The PCB is received this way from our PCB manufacturer. Before I push to much, I would like to know options for a cause. The warp is so bad,
Electronics Forum | Mon Jun 26 16:56:54 EDT 2000 | FlynHi
Why do you want to go to WARP? I hope someone did not suggest WARP was the answer to some problem. I don't think you will have any trouble upgrading to WARP.
Electronics Forum | Mon Feb 02 11:51:23 EST 2004 | prs
Hello, I'm working with Nelco 4000-13 material .031 thk and am experiencing some warping. the board is roughly 1" by 3" and the warping is in the long dimension. The grain on the panel is also in the long dimension. Any pointers or advice on contr
Electronics Forum | Mon Jun 13 07:48:55 EDT 2005 | Bob R.
BGAs warp during reflow. When balls solidify they lock the device into this warped state. It's not a big deal until the warp gets severe enough that you have opens and/or shorts.
Electronics Forum | Thu Jul 22 05:00:45 EDT 1999 | George Verboven
| I have pcb's in which i am experiencing warping. | the boards are 12.8125" on a diagonal measurement. | they are out approximatley .010". | the boards are combination thru-hole,smt, they also have 3ounce copper.what is acceptable,and what is the pr
Electronics Forum | Thu Apr 20 13:55:31 EDT 2006 | cyber_wolf
Here is the problem : We have 2 AP25 printers with dedicated tooling. After we run side one boards through reflow, we get some warpage in our boards occasionally.(Sometimes we get a lot of warp depending on the geometries of the substrate) When the
Electronics Forum | Mon Oct 03 19:15:32 EDT 2005 | cn
is this a single brd or multi up array? What is the thickness? where were the brds made, state/country? I had an issues with a brd which was fabed in mexico during the humid months there was mosture trapped in the brds which caused many strang things
Electronics Forum | Tue Aug 29 15:05:16 EDT 2006 | cyber_wolf
We run a lot of double sided boards. So I need a printer that will handle warped boards well. Can anyone tell me which printers work better on warped boards ? Our AP25's are crap on warped boards. If I had a penny for every time our cameras got kno
Electronics Forum | Wed Jul 21 12:19:01 EDT 2010 | mb_mfg
To eliminate warping during processing, we have provided customers with composite fixtures to support the board on all 4 edges, with retractable pull down claps that can be added to the top of the PCB after the screen printing. Simply by pushing the
Electronics Forum | Tue Jun 14 14:57:29 EDT 2022 | glasscake
Check for warp during reflow or placement, if your board is bowing you are not going to make a good solder connection. If your board is warping during reflow you may need to make a currier to support the board during reflow if using the edge to tran
