Electronics Forum | Mon Sep 26 07:56:38 EDT 2005 | pavel_murtishev
Hi! Try to make "R_AXIS_ACCURACY" calibration for all of FNC heads for back camera only. I met such problem on Topaz-X. There was clearly seen offset on 0.8mm pitch components. I simply calibrated all cameras for FNC nozzles and problem disappeared.
Electronics Forum | Wed Aug 10 11:57:41 EDT 2005 | jh0n!
I recently picked up a used GSM-1, 1994 or 1995 vintage. I'm in the process of setting up my first product on it - everything seems to be going well, however there's a constant inch or so offset on the X-axis. That is, when the board slides in, it'
Electronics Forum | Tue Sep 13 12:00:57 EDT 2011 | swag
Flex circuits are assemblies that can be bent or twisted into shapes after assembly (flexible). When heald in panels for SMT assembly, it's difficult to get repeated x/y offsets so you need to consider fiducal placement in your design for placment m
Electronics Forum | Sun May 16 00:07:58 EDT 2010 | tpappano
I have a Philips CSM84VZ. There are offset calibrations that compensate the X and Y distances from the camera to the heads and the beam pointer. Perhaps yours is similar and just needs a small Y adjustment for the beam pointer.
Electronics Forum | Mon May 07 15:03:06 EDT 2007 | jmelson
Yes, I took the chuck off head 3, and made my own nozzle, which is working quite well. I can't set head 3 to vision, as this machine doesn't have the vision system. I set it to "IC" and that seems to work fine. I set mech alignment 1 and 2 to yes,
Electronics Forum | Fri Oct 11 03:06:00 EDT 2019 | bukas
Hello Dekhead, it is a constant offset, like 0.5 mm to right when machine prints away from operator. When print goes towards the operator there is no offset. I swapped X5 and X6 cards with spares I got but still same result . I set the program to hav
Electronics Forum | Mon Feb 14 15:14:54 EST 2000 | dean
Dek 248 / 249 (mfg'95) MPM 2000 Realignment? Are you having to insert print offsets (X.Y, theta)? If yes, your vision cubes are out of alignment. This typically happens if a "crash" occures. A "C" tool can correct this. Or are we talking abou
Electronics Forum | Fri Feb 27 07:59:47 EST 2004 | cyber_wolf
Is it true that a DEK printer will not accept a standard 20X20 stencil. I have heard that the image on the stencil is offset as well.(you need special stencils just for DEK printers?) Do they make an adapter to accommodate standard 20X20's with cent
Electronics Forum | Wed Oct 28 13:29:11 EDT 2009 | swag
Can anyone tell me the command I need to type to get into machine configuration in DOS MpM software? I want to change x/y/theta cal. settings to adjust for vision offset because I don't have the fixtures to do a calibration.
Electronics Forum | Tue Oct 18 10:07:59 EDT 2011 | swag
We converted all ours to NT so it's been a long time since I did config changes in DOS. Here's what I think I remember from when we had DOS O/S: Exit to DOS and type CD CONFIG in the command line. You should get a full list of configuration settin