Electronics Forum | Tue Jul 29 14:25:20 EDT 2014 | kenkay
We have been struggling for a while with some through hole sealed mechanical relays that fail at test after they have been sitting a while. They will initially pass test, but seem to fail if they sit for a few days. We made sure our wave process was
Electronics Forum | Wed Aug 13 19:57:05 EDT 2014 | suroy
After wash cycle, some of the inductors are open (broken wire). Resistance across the two ends should be below 4 ohms (normal) however on broken wire shows above 200 ohms. I am wondering if anyone else has seen this problem. We are using High-Reliabi
Electronics Forum | Fri Oct 31 09:14:25 EDT 2014 | gregp
OK...here is an example of something very cost effective and a very reliable... http://zierick.com/pages/sm_ipct.php The wire gets crimped in after reflow which is currently not automated. (WaveMasterLarry...this is the other end of the cord where i
Electronics Forum | Mon Sep 29 13:36:01 EDT 2014 | dustin
I came into work this morning to an error on one of my printers. After powering on machine, the error MACHINE DOWN popped up in the top left corner of the screen. I have the giant manual and could not locate a solution for this error. I have checked
Electronics Forum | Fri Nov 07 11:13:35 EST 2014 | dyoungquist
We have run Mydata machines for 10+ years with no ESD damage from the machine itself that we know of. Can you tell us how you have verified it is the machine causing the ESD damage? It seems to me the ESD damage would be far more likely coming from
Electronics Forum | Fri Nov 21 10:28:23 EST 2014 | gregp
Hi Adam, So with two to three people on the slide line, each only able to place five different components maximum, this means you generally don't exceed 10-15 through hole parts per assembly, correct? I am guessing these are mixed technology boards
Electronics Forum | Thu Nov 20 11:28:41 EST 2014 | markhoch
I've spoken with a number of Engineers about this subject and there didn't seem to be a consensus number. In my own experience, I found that we were replacing the stencils after approximately 30,000 print strokes. In my predictive maintenance spreads
Electronics Forum | Wed Dec 03 11:55:42 EST 2014 | spoiltforchoice
I think there are several answers: 1)Design Fail - slap whoever created it 2)Fit that connector as a manual process after the PCB is finished. 3)Print side 2 using a jet printer 4) Shield the fragile LGA and reflow it twice anyway. 5)Use a thicker PC
Electronics Forum | Thu Dec 18 08:18:48 EST 2014 | kevinb
Does anybody know what material is used for over molding I/Cs. I would like to find a material that others use to mold there electronic components. I am wire bonding and mounting a small cap (0201) on an FR-4 board. I need this material to withsta
Electronics Forum | Thu Dec 25 14:23:21 EST 2014 | luca2006
hi, i need download link for installation soft for samsung cp40cv , after pc replace and installation of windows xp I lost all drivers and soft , Soft vers was 6.87 New pc is commell hs 862 + passive 3 slot for isa Thanks