Electronics Forum | Mon May 15 15:20:48 EDT 2017 | emeto
To program Juki should be fairly easy to teach any computer literate. To learn all capabilities of CCAM - that is a different story.
Electronics Forum | Thu May 12 22:46:48 EDT 2016 | karan12
for juki 740,760 and 2080,using hlc software how do u programme panel pcb 8 in one panel. Need to know how to create pwb data.
Electronics Forum | Sat Aug 13 23:41:31 EDT 2016 | sarason
Download PCBSynergy which is located here. http://members.iinet.net.au/~sarason/ It has outputs for the KE750,KE760 and 2080 from Juki It will read a large number of CAD formats. Including Altium PCBDOC, and Protel PCB and all the variants inbetwe
Electronics Forum | Mon Mar 30 10:43:31 EDT 2015 | dazdoc1977
Cheers Rob, I thought that I wasn't far from the true answer....I figured that if we were to use a "first piece assembly " quote to get a first off through smt production, This would include start to finish process....e.g Programming to first board
Electronics Forum | Fri Dec 29 11:20:59 EST 2006 | Pete
No experience with 5 of the 6, but have owned Juki for 3 years, after an extensive review of competitive units. Now have a 2010, 2020, 2050 and 2060, all EXCELLENT machines! OUTSTANDING Service organization, No charge for software upgrades, LOW co
Electronics Forum | Wed Jan 03 16:45:37 EST 2007 | Steve
Hi Sue! I've worked with Fuji, Assembleon, Amistar, Mydata, and Juki over my 20-years in the industry...working with Fuji now, and I will agree that Juki machines are simplest to program, operate, and maintain. Support has always been good...I wish
Electronics Forum | Fri Jan 05 07:38:52 EST 2007 | John Burris
I would concur with the above comments. We have used Juki/Zevatech from the 570L model on and run a full complement of 700 series machines. I have a 10 year old 730 machine that still cranks out product every day over two shifts without problems. Yo
Electronics Forum | Mon Feb 27 11:55:58 EST 2023 | dontfeedphils
It depends on how you plan on loading the programs the next time. I used to always send the programs to the machines from the main IS program, but if you just want to load programs from the machine (assuming your programs don't require updates) then
Electronics Forum | Wed Mar 01 15:06:47 EST 2023 | dontfeedphils
Then you must be missing a piece of the software suite because I was able to keep and maintain "master" programs on the IS server and then create "job" programs each time they ran a job and those were sent to the machines from a central line control
Electronics Forum | Tue Feb 28 08:14:58 EST 2023 | kirill
I used to work on Siemens ASM machines, with server that had a program called Siplace Pro, which was connected to lines, and from line computer they could load the program to the machines in the line, and I could do updates "online" if needed, before
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694