Electronics Forum | Fri Oct 23 00:34:13 EDT 2015 | nhel_0009
The board that facing to the front..its on the left side sir..thanos again.
Electronics Forum | Thu Nov 12 11:21:42 EST 2015 | davef
IPC J-STD-003. Solderability Tests for Printed Boards
Electronics Forum | Fri Nov 20 00:14:23 EST 2015 | ttheis
To clarify- what I have is: 1. Manual stencil print process 2. Dynapace conveyor into GSM 3. Dynapace conveyor out of GSM into oven So what I need is a way to tell the conveyor into the placement machine to "go" when a board is loaded onto it after
Electronics Forum | Mon Dec 21 09:34:51 EST 2015 | proceng1
Samsung, ok. What about a printer?
Electronics Forum | Thu Feb 11 20:38:47 EST 2016 | davef
Try: * J-STD-003 “Solderability Tests for Printed Boards” * IPC-4555 OSP Finish Specification
Electronics Forum | Mon Feb 15 14:58:36 EST 2016 | charliedci
Remove the aluminum plate/filter. The first board on left side. The run/halt switch should be visible.
Electronics Forum | Fri Jun 03 20:21:56 EDT 2016 | sonavc
Thanks , I fix this problem. Now I know the boards stop near by camera.
Electronics Forum | Mon Jul 04 09:03:44 EDT 2016 | davef
Can you use your field meter to measure the level of charge on your boards?
Electronics Forum | Wed Jul 06 10:40:43 EDT 2016 | ttheis
What about grounding the board while you are cleaning it to immediately disspate the static?
Electronics Forum | Tue Aug 02 12:05:37 EDT 2016 | ttheis
Leave a circular area around the fiducial without any mask so bare board is shown.