Electronics Forum | Sun Nov 28 03:27:03 EST 2004 | jmedernach
Hi Guy, I see them frequently. Usually, if I have voids on my BGA's, I'll have them on my passives as well as at leaded device solder joints. They run rampant through the entire assembly. For me, it's a function of my profile. I only have a 4 zon
Electronics Forum | Mon Aug 22 08:09:51 EDT 2005 | cyber_wolf
The only time I have seen any Fuji IP need calibration is if you have had a serious crash, or if an axis or camera has been removed. Make sure you don't have something else going on. For instance check these things: 1.Check nozzle vacuum 2.Make sur
Electronics Forum | Fri Dec 10 13:31:59 EST 2004 | Alan
We purchased the NXT about 4 months ago. Even though it is a new platform it has been running smooth with no hardware or major software issues. We are in a pilot factory so we don't get as much use out of it as some production facilities. Keep an
Electronics Forum | Fri Dec 17 04:03:41 EST 2004 | Rob
Hi Vinit, Not entirely sure of the exact dates, but I think you may be being a little creative in your comparisions. The CP4 was definitely around by 1991, whereas I'm sure the base 1 FCM appeared around 1996. A fairer comparison would be the CP6
Electronics Forum | Thu Dec 16 18:36:01 EST 2004 | mattkehoe
We use water soluble solder paste. When it gets a little dried out, can we add something to rejuvenate it? Liquid flux? We do not place components, just print and reflow the solderpaste so solderballs, spattering, and other issues like those are of
Electronics Forum | Thu Dec 23 12:32:57 EST 2004 | OverTheHill
All right all you Mydata techies. Here's the scoop. My old TP9 seems to be damaging (bending) it's A12 and A13 tools way too frequently. Like 4 tools in the last month. It appears the tool is colliding with somthing. My perfect operators SWEAR there
Electronics Forum | Wed Dec 29 17:58:30 EST 2004 | carterhoward
Hi All, We�re a C-M and have been using C-Cam for about 4 or 5 years now. We we�re one of the first customers on there 16 bit platform, so we�ve seen a lot of changes. Our company runs Philips with PPS, and C-Cam has been a rock sold platform. As f
Electronics Forum | Wed Jan 26 09:51:51 EST 2005 | jbrower
Sure, to be a true lead free enviroment all components need to be lead free or fall within the specifications of lead free as defined by the RoHS Directive. What I am doing is starting stage 1 of our journey. Layed out it looks some thing like this.
Electronics Forum | Wed Feb 09 12:31:54 EST 2005 | russ
We are not doing this right at the moment but I have done it with great success. Of cource it depends on your pad layout we have a 20 mil gap in between pads, we printed at 10 mil wide with a 5mil stencil. I will try to find the glue we used, I kno
Electronics Forum | Wed Feb 09 18:56:28 EST 2005 | darby
I would suggest that you contact your local contract manufacturers and see if they want some "free" labour for a month or so. There may be difficulties with insurance etc - maybe your HR dept could help there. Try and find one with a few different li
