Electronics Forum | Thu Sep 15 10:55:40 EDT 2016 | emeto
ICAPE is an agent. They work with multiple board houses in China.
Electronics Forum | Wed Nov 02 19:00:10 EDT 2016 | rdubya71
look at bostik 7538
Electronics Forum | Fri Nov 04 12:12:36 EDT 2016 | defakto227
It doesn't appear that the Bostik material has a UL listing.
Electronics Forum | Sat Nov 05 02:56:14 EDT 2016 | anhsang38
checking component--> turn off vacuum and blow air to place component on the board.
Electronics Forum | Thu Dec 29 10:41:42 EST 2016 | luciano
Thanks Evtimov, The flux is brand new and the amount of flux is enough and consistent across the surface of the boards.
Electronics Forum | Fri Dec 30 11:31:32 EST 2016 | horchak
First profilers are expensive and you can use temperature dots for setting up a wave. You stick them to the top side of the board and they change color based on temp. Top side temp should be around 250f or 125c when it hits the fountain. If you spra
Electronics Forum | Tue Apr 18 14:03:52 EDT 2017 | davef
Can you use a breakaway tab on the board that you're assembling as your coupon?
Electronics Forum | Wed Jun 21 19:01:48 EDT 2017 | mac5
Try baking the boards; you may have a moisture problem.
Electronics Forum | Sat Jun 24 07:23:06 EDT 2017 | tch
You will need to preheat the boards for a lead free selective solder process. A preheat module is critical for any wave or selective solder process, if you don't get the board preheated properly the solder is going to resist flowing to the top of the
Electronics Forum | Thu Feb 15 17:02:34 EST 2018 | davef
Check that it will properly solder the range of boards that you produce