Electronics Forum | Fri Jan 30 14:20:55 EST 2009 | scottp
I do a lot of thermal cycle testing of new components for my company and often when I lay out a test board I'm trying to simulate 4 or 6 layer boards but I don't need them for routing so I just use a solid fill of a cross-hatch pattern. I've done it
Electronics Forum | Tue Aug 28 08:28:30 EDT 2012 | rgduval
We agree with all of the previous comments, and would add the following: Warpage is generally caused by excess moisture in the raw boards. Have you tried baking the boards prior to assembly? We had this issue on a simple 4-layer board, and found t
Electronics Forum | Sat Dec 14 02:29:52 EST 2013 | padawanlinuxero
Hello I hope this helps For a component with axial leaded - vertical The clearance of the component body or weld bead above the land is 1.00mm (0.039in) Component body must be perpendicular to the board The overall height does not exceed maxim
Electronics Forum | Mon Aug 27 12:31:04 EDT 2012 | rway
Its no my turn to give some advise. My first > question would be can you put the boards into a > carrier of some sort. There are many wonderful > companies that make carriers that are ment for > running down a smt line. This can be expensive > u
Electronics Forum | Mon Jul 26 18:01:30 EDT 1999 | Earl Moon
| Presently protos of micro-bgas (80i/o) pitch .030/.031 | 12BGA per assembly | | The board is a (.062, 4 layers) FR-4 using Dry film | Pads .014inch | Vias within footprint .020inch | Vias to be filled by bottom side(solder side) only .030in dia. F
Electronics Forum | Mon Jul 26 18:05:18 EDT 1999 | ScottM
| Presently protos of micro-bgas (80i/o) pitch .030/.031 | 12BGA per assembly | | The board is a (.062, 4 layers) FR-4 using Dry film | Pads .014inch | Vias within footprint .020inch | Vias to be filled by bottom side(solder side) only .030in dia. F
Electronics Forum | Wed Jul 22 10:21:46 EDT 1998 | Dave F
| Hi all, | I am new to SMT. In past I've made many PCB boards with my small hands at home, but I've used regular technology drilling the holes for the components. | I am trying to use SMT for my projects. SOP packages I was able to solder using a re
Electronics Forum | Mon Aug 27 11:51:47 EDT 2012 | cobham1
Its no my turn to give some advise. My first question would be can you put the boards into a carrier of some sort. There are many wonderful companies that make carriers that are ment for running down a smt line. This can be expensive unless you order
Electronics Forum | Thu Apr 29 10:24:15 EDT 2021 | oxygensmd
I have the same issue but with one customer only. All the other have smaller or more difficult QFPs with really low bridging issues - close to no-one. I think the PCB and PCB design also an issue - other customers are using 32/64/100/144 QFPs and we
Electronics Forum | Tue Jul 27 11:32:01 EDT 1999 | M.L.
| | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | 12BGA per assembly | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | Pads .014inch | | Vias within footprint .020inch | | Vias to be filled by bottom side(solder side) only
