Electronics Forum | Fri Mar 23 08:22:35 EDT 2007 | oldsmtdude
I've used standard Nikon for years. We evaluated the Mantis and while first impressions were positive but with continued use EVERYONE chose to move back to the standard eyepiece. A lot depends on what size components you're dealing with - when you s
Electronics Forum | Fri Jun 15 18:22:49 EDT 2012 | stentech
Our lasers are accurate to +/- approx. 5 microns over 20 "X-Y. I have seen boards 18 x 24 stretch 7mils. I would agree with others, the only way is to send a board to you stencil vendor so they can edit the file to match the board. This is very commo
Electronics Forum | Mon Jul 16 12:19:00 EDT 2012 | jorge_quijano
Does anyone have experience with very large PCBs at Solder Paste inpection? our largest board is 32" x 22", it is a 0.250" thick and I was wondering if there is an Inline SPI for such dimensions. Currently I have a benchtop height measurement device
Electronics Forum | Tue Aug 16 20:11:34 EDT 2022 | emeto
If you run a TH parts, X-ray is needed in 95% of the cases. AOI will be your SMT criteria except bottom terminated components(need X-ray). After equipment, you should still have 4X 6X 10X 20X optical checks based on part size. Building PCBAs without
Electronics Forum | Sat Jan 12 15:37:33 EST 2013 | mwac
If the machine is printing with an offset on all products, then yes the printer needs to be calibrated with the fixture. That particular model requires the same tools as the 500 and 1500. They were different from other MPM machines of that or prior
Electronics Forum | Tue Jun 01 16:42:48 EDT 1999 | Scott S. Snider
| After lots of years with Panasert machines, I am starting to need to learn again. | 1. For the AP-20 can you retrofit 3D vision? Would you bother? | 2. Also for the AP, can you use 20x20 DEK screens with an adapter? | | Thanks to all you MPM expe
Electronics Forum | Tue Apr 14 10:00:47 EDT 1998 | Chrys
| Could someone point me in the direction of or have any info on a basic no frills Ultrasonic cleaner capable of cleaning 20"x20" stencils? | Thanks, | Jack LaRue | jlarue@mail.nortechsys.com Have you looked into the used equipment market? If you're
Electronics Forum | Fri Oct 25 11:21:05 EDT 2002 | soupatech
This may sound like a stupid question but keep in mind I am very new at this and most of the training I have recieved has been from operation manuals and this forum (thanks to all). Our purchasing agent (new hire) is ordering a stencil for the first
Electronics Forum | Tue Dec 03 07:57:27 EST 2002 | pjc
Price of DEK 248 and MPM UP100 are about the same, $22-36K range. MPM UP100 has programmable squeegee pressure. Precise, repeatable results with less operator involvement. Pressure parameters saved in board program file. DEK 248 has manual microm
Electronics Forum | Tue Mar 25 08:35:49 EST 2003 | pjc
AccuFlex is the replacement for UltraPrint 1500. UP1500 is going obsolete. AccuFlex was desgigned for fast setup and changeovers and takes some tasks away from the operator. The UltraPrint 2000 was designed for high production, even though many users