Electronics Forum | Tue Feb 29 22:53:13 EST 2000 | KH
I have used both the QX2 and BGA3500 hot air rework system from Metcal; both are great systems; the QX2 is a very simple system for leaded devices, easily trained and very inexpensive compared to SRT, Air Vac, and Conceptronics. The BGA3500 works on
Electronics Forum | Fri Jan 28 09:16:37 EST 2000 | Rene
The BGA-2000 is an old system thats correct ! I am a BGA-3500 user (the newest version)with windows software and a large underboard heather, i am verry happy with the system after using an APE wich was verry bad for my aplication. There is a posibili
Electronics Forum | Fri Jul 23 01:03:28 EDT 1999 | KYUNG SAM PARK
HI Earl Thank you for your answer. Let me know you about the hot you mentioned First of all, The rework machine is the BGA3500 manufactured by 0.k international ] ��DESOLDERING HEAT ��IRON TIP TEMP : 350-370��(MEASURED) ��REBALLING
Electronics Forum | Wed Aug 19 16:21:15 EDT 1998 | Doug Nebel
Steve, Ok Indust. made a solder fountiain ( SA-5201) that we use for the situation you describe. I was told that OK no longer make it, but you might check and see if this is true. It listed at about $3,500. I also saw that BONKOTE make a similiar
Electronics Forum | Thu Dec 16 10:08:20 EST 2004 | jdengler
Hi Clayton, If your in the USA you should contact Fuji America for new manuals. I bought some a couple of years ago for $35.00 ea. That's a bargain in this industry! Used manuals often have missing or damaged pages. These always seem to be the o
Electronics Forum | Tue Sep 26 15:27:42 EDT 2006 | Steve
I know for a fact that DEK will charge you $3,500 a year if you want parts and/or phone support for a used printer that you bought on the open market. Electrovert wants $5,000 per machine for any support for used equipment purchased from the open mar
Electronics Forum | Sun Jan 14 12:48:53 EST 2007 | SMTRework
Also, I was beginning to think that the humidity level in the facility was a factor.. but I don't believe that's the case.. as this condition seems to occur regardless of the humidity level.. Equipment being used is as follows.. Metcal BGA 3500
Electronics Forum | Tue Sep 16 16:55:51 EDT 2008 | rayjr1491
I am a doer myself but with the turn around and cost on EFORM stencils I prefer to be right and starting with math is always the best way. We have played with reducing apertures even stencil thickness as low as 4 mil. On the side that this component
Electronics Forum | Tue Sep 16 17:56:36 EDT 2008 | slthomas
"....over 3500 apertures in a circuit that is about 1 x 1.5 inches..." 8O Yeah, Larry would definitely be the go-to on this one. :P I would think reducing stencil thickness would be your best bet to avoid that ratio problem, but how durable is a .
Electronics Forum | Fri May 14 02:04:16 EDT 2010 | dilogic
Sorry for not clearing that out - it's not the problem of lost vision sw. - I even can't connect to it in diag. mode. Must be some hardware issue. I've checked video outputs with the scope and instead of constant freqency ~15kHz, it drifts up and dow
