Electronics Forum | Mon Feb 24 17:06:36 EST 2020 | emeto
It looks like one oven is 10years newer than the other, so if we assume same maintenance routine you should get another 10 years if life on it. On the TH side, you know your board complexity - for me wave have much more value than a Selective. Selec
Electronics Forum | Sat Feb 22 11:37:00 EST 2020 | kylehunter
Hey all, I've made a post in the past about us expanding to a new space, but I wanted to do a new post with specific questions. We currently have a DEK 265, Phillips Opal Xii, and a Heller 1500. Our main reason for expanding is to have a lead-free
Electronics Forum | Tue Feb 25 06:52:56 EST 2020 | dontfeedphils
FYI, in my experience, programming and fine tuning select solder is usually quick and painless.
Electronics Forum | Tue Feb 25 16:03:44 EST 2020 | kylehunter
Oh no, it's rated at a max of 120A at 208V. We have the power for that. At least the Vitronics is, not sure on the Heller.
Electronics Forum | Tue Feb 25 17:41:29 EST 2020 | emeto
What we did not talk about is Mycronic machine. Great choice for small batches.
Electronics Forum | Mon Feb 24 17:10:53 EST 2020 | kylehunter
> It looks like one oven is 10years newer than the > other, so if we assume same maintenance routine > you should get another 10 years if life on it. On > the TH side, you know your board complexity - for > me wave have much more
Electronics Forum | Mon Feb 24 16:30:07 EST 2020 | stephendo
You might be able to get a step up transformer although I would not recommend that unless it is a good solution for you. What is the input voltage to your facility? It is probably 600V (or something close). If so then you could get a step down transf
Electronics Forum | Wed Feb 26 09:16:42 EST 2020 | emeto
THese you can have single or dual head, long for a lot of feeder positions, with bigger or smaller work area based on your needs. Feeders concept is very clever and setups are quick. A lot can be done on the fly on the machine, compared to other bran
Electronics Forum | Thu Apr 15 16:33:40 EDT 2004 | wgaffubar
We never really use to calibrate the thermocouples on our reflow oven or wave solder systems, but we did disconnect the T/C's and input a calibration standard to check that the computer cards were correctly reading the proper temperature for a given
Electronics Forum | Mon May 24 12:54:25 EDT 2004 | pjc
Maybe here's an opportunity to get a new oven. Electrovert, BTU and Vitronics offer closed-loop N2 control as an option. This, together with other improvements on oven design can reduce N2 consumption by as much as 40%. Not to mention reductions in e
.gif)
