Electronics Forum | Fri Jul 09 23:45:22 EDT 2010 | dman97
I have a CP642 machine that always gives me a Station 17 or Station 19 nozzle error when the machine selects the 2.5mm 3.7mm or 5.0mm nozzles. It always throws an unknown nozzle station 17 error after all the heads have switched to the above mention
Electronics Forum | Wed Mar 13 09:08:40 EST 2002 | stockley
It is a little bit sad that I know this - be prepared for some confusision - this is not as simple as it might seem. Something tells me that the calculation of the tolerances for the nominal dimensions is a little inconsistent. As I recall the defa
Electronics Forum | Fri Feb 11 12:21:44 EST 2000 | Finepitch Services
Doug, What I've done in past was calling them as 1206T.5, 1206T1.0, SOIC16, RESNET16, SOIC16T5.0, ALCAP4, ALCAP5 etc. T means thickness but for the ALCAP case 4 means 4mm diameter. If you have the time and patience, having a board and attaching a s
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Feb 15 23:52:31 EST 2001 | Dreamsniper
Hey guys, I ran a couple of profile in our wave solder machine using wave optimizer and this is what i got: Parallelism = 0.0 Immersion Depth = 2.1mm to 2.4mm with varying immersion time from 1.1 sec to 3.1 secs. Contact Length = between 5.0 to 6.0
Electronics Forum | Tue Apr 20 14:25:05 EDT 1999 | Stephen Smith
I am wondering if anyone has any info regarding solder paste misprint clean-up procedures for Entek Plus CU-106A PCB's utilizing a water-clean solder paste. In a implementation procedure they recommend a 2-3 minute wash cycle with the following crit
Electronics Forum | Mon Dec 08 07:44:03 EST 1997 | Mika Johnsson
| I would like to hear from anyone producing high mix (~200 modules) with low volumes (5-2000 per year) using an automatic line running lot sizes in the 5-50 range. We are engaged in an investigation to invest in this capability. A view into the or
Electronics Forum | Tue Feb 11 17:14:50 EST 2003 | Matherat
Traditional methods of hand assembly are as you described. For a company that is concentrating on the 1-5 or 5-50 quantities you've described, you need to look for ways to accomplish your task with speed, repeatablilty, quality and at a fair price. T
Electronics Forum | Thu Oct 02 21:00:26 EDT 2003 | davef
Who says the chlorine comes from your tap water? Our PTOW dumps boat loads of chlorine into our water periodically. Sometimes it's so bad you can smell it. We doubt that it is the source of your problem. This chlorine will volitize very quickly,
.gif)
