Electronics Forum | Fri Apr 10 09:59:13 EDT 2020 | spoiltforchoice
> We unfortunately use GERBER data to digitize <BR> > boards more than any CAD. We are CM and many of <BR> > our customers do not provide CAD. With some <BR> > Legacy products, we still use 274-D Gerbers
Electronics Forum | Mon Aug 18 22:55:05 EDT 2008 | kpm135
Nozzles are really machine specific. Your best bet, if you're looking for the correct nozzle for a part, would probably be to send a strip of parts and the data sheet to the manufacture of the machine and ask them for their recommendation. Most machi
Electronics Forum | Tue May 18 16:40:22 EDT 2010 | m79d
I am having some problems getting the IP1 to place a SSOP28 package,pitch 0.65mm lead width 0.3mm. I am selecting computer vision 012 (tried 011) and vision type 100. EL data was put in looking at the datasheet and also measuring the device. Have tri
Electronics Forum | Mon Aug 02 12:28:16 EDT 2004 | jbabson1
The speed control for the extend and retract is in the Part Data under Process data under MTU. John
Electronics Forum | Tue Aug 05 03:48:56 EDT 2014 | spoiltforchoice
If you are considering MyData (a fine choice) I would also consider Europlacer. They are in many ways, machines designed for similar markets with slightly different approaches and advantages. I would suggest much of your experience with Manncorp woul
Electronics Forum | Fri Aug 04 10:09:47 EDT 2017 | ks0707
Good morning, I looked one cycle of programming of Koh Young 3D AOI machine first, and will do same thing for JUKI Pick & Place and Mechatronic 2D AOI machine soon. BTW, I found from User manual of Koh Young 3D AOI that it allowed Mento Export file
Electronics Forum | Sun Sep 16 21:10:40 EDT 2012 | vikings
I did not desire the manuals to learn how to operate the machines, rather I wanted to know technical data such as the proper PSI for the air supply lines.
Electronics Forum | Sat Jan 05 09:34:10 EST 2019 | unisoft
5 minutes to program your assembly machine with the Unisoft ProntoPLACE software — http://www.unisoft-cim.com/pcbplace.htm --- contact us now & we will show you using your data or ours Use either CAD, Gerber or XY and BOM Save time on NPI, faster
Electronics Forum | Fri May 22 22:13:18 EDT 2020 | gabriel1blue
Hi guys we had problems with our old pick and place machines and all the parts data and mark data was lost when we had to restart the machine. We made a copy but it has been so long that we used it that now it's not working. I hope someone has one of
Electronics Forum | Wed May 25 17:58:07 EDT 2011 | rssimmons
The SimmScope is a first article inspection system that uses an overhead digital microsope on a motorized gantry to inspect the board - much like an AOI - except that it does not automatically make the pass/fail decisions. It is up to the operator to
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774