Electronics Forum | Wed Jan 13 20:44:42 EST 1999 | Steve Gregory
Hello Sanjay! The cheap deal I use that Earl spoke of is called a SMarT Measure. It's a depth measuring microscope that uses the same principle of measuring optical focus that the units from Vision Engineering do ( if you've ever looked at any
Electronics Forum | Thu Mar 30 13:26:19 EST 2006 | Tech
So you use the dogbone alignment jig and the 3mm allen wrench to break them apart. The dog bone alightment jig would keep the rest of the joints from breaking loose while you loosened the allen wrench. This is basically the same thing I described usi
Electronics Forum | Fri Oct 23 14:58:40 EDT 1998 | Dave F
| We've got a continous flow cooling problem from our wave solder process into ICT. Our current configuration is a flatbelt conveyor into a manual de-pallet process, operator then places on to an edge conveyor. We've tried muffin fans, look good bu
Electronics Forum | Sat Apr 25 01:26:52 EDT 1998 | Mikec
| I have a problem with the insertion tooling of a 6241B VCD Insertion Machine. I must replace most of the parts of the insertion head but the screws of the Rails has the socket head damage, so it is not possible using the Allen Tool. | I am looking
Electronics Forum | Thu Mar 30 12:57:21 EST 2006 | cyber_wolf
Fuji has said a lot of things in the past, then changed it later on. Just for the sake of argument....The guys that have trained me worked at Fuji for a minimum of 12 years. Not quite sure what Tech is talking about, but I do not recommend doing w
Electronics Forum | Thu Jun 14 00:10:18 EDT 2012 | tech1
Most of it depends upon the type of Y wagon you have. if they are internal conveyors you need to remove the covers from the operator side. There are 3 screws holding the Y wagon down, 2 of them are hex screws and the one in front is an allen head. W
Electronics Forum | Wed Feb 20 15:21:56 EST 2013 | rmitchell
Hi, hopefully I am too late, it is fixed and you are up and running. Have you tried MPM support on the phone? We have 2 older MPM's and the blow the driver modules in the bottom drawer on the back of the machine. There are different drivers for dif
Electronics Forum | Fri Oct 16 10:20:40 EDT 2015 | markhoch
I don't have time to go in depth, but I will say this.. Considering onsite Service... Please please PLEASE make sure your Service Engineers travel with tools. I'm very tired of having to scramble to find tools for FSE's who show up at my facility wit
Electronics Forum | Thu Jan 14 11:08:29 EST 1999 | Mike McMonagle
Steve, Whoa, take a breath! That was at least a dollar three-eighty answer. I've got to agree that nothing can replace a qualified, concientious operator for assuring quality. When I too worked at a small shop there in SillyCone Valley, my seni
Electronics Forum | Thu Jan 14 15:22:14 EST 1999 | Earl Moon
| Steve, | Whoa, take a breath! That was at least a dollar three-eighty answer. I've got to agree that nothing can replace a qualified, concientious operator for assuring quality. When I too worked at a small shop there in SillyCone Valley, my
