Electronics Forum | Wed Oct 29 23:40:29 EST 2003 | ppcbs
We here at Precision PCB Services, Inc. Perform selective ball removal. We just completed a job today where we removed 4 balls, and then installed traces to dog-bone the pads at two locations on 30 BGA's. An eaisier and more cost effective solutio
Electronics Forum | Wed Jan 06 19:43:15 EST 1999 | Steve Gregory
Hey All you Einsteins out there!! I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket, (act
Electronics Forum | Wed Jan 06 21:17:31 EST 1999 | Dave F
| Hey All you Einsteins out there!! | | I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket
Electronics Forum | Wed Jul 26 12:39:00 EDT 2006 | spari77
we encounter some open joint on the CPU socket after rework. We tried to reflow the boards again (using BGA rework machine) and found that the contact issue was resolved. Is there any risk to perform a reflow again on the CPU Socket boards without re
Electronics Forum | Thu Sep 07 12:52:30 EDT 2000 | Doug
Which fuji machines do you have? The new manuals are pretty easy to follow, if you have them. SMD3 machines have the SMD3 Manual 7.1E and the BGA/Connector manuals available. Contact fuji training for more details. Otherwise, if you have certain ques
Electronics Forum | Fri Sep 18 07:16:18 EDT 1998 | Wayne Bracy
Steve: You might want to contact Advanced Interconnects I know they manufacture standard BGA fixtures, but not sure about micro BGA. Advanced Interconnects, Inc. West Warwick, RI (401) 823-5200 (401) 823-8723 Fax Howard Gonzales You could also call T
Electronics Forum | Tue Jul 14 13:23:59 EDT 1998 | Tom
I am looking for some general information with respect to BGA devices on circuit boards. I work for an automation company and am curious to know who's doing what with BGA placements, specifically the heat - sink application to the BGA device. General
Electronics Forum | Tue Aug 30 22:38:54 EDT 2005 | cabs
Does any one knows where to get a plating thickness meter that can be use in the fine pitch contacts and trace in PCB application like BGA pads? If there's a hand held device at lower cost much better... Also if you can recommend companies that offer
Electronics Forum | Mon Feb 14 14:59:44 EST 2000 | hany a. salam
Hello there: We urgently need a 45mm FRONT CAMERA to be installed on a Philips pick & place M/C. The M/C model is EMERALD & it is one of the GEM line series. The camera should manage to visualize the BGA components. Please if anyone can give a hand
Electronics Forum | Tue Jan 23 10:22:27 EST 2007 | Peter W.
Hello, maybe you are experiencing the so called "head in pillow" defect. It is especially critical for larger BGA. The defect comes from the deformation during reflow of the BGA, so that some of the balls are lifted and have no contact during liquid
