Electronics Forum | Wed Oct 13 01:12:31 EDT 2004 | saiwong
I think forgot one most important thing. SMT is not all. In China, after the SMT process, QC, QA, casting, packing etc. It need lots of labors. I really one worker can handle 4 lines. Nokia still have two bid factory in China, Motorola has two also.
Electronics Forum | Wed Feb 22 09:48:24 EST 2006 | slaine
Hi Ive checked into this a bit more, there are two coatings im told you can get one is a teflon coating that you paint on then bake, the other is a red oxide (lead free) paint. Also if your using solder pots and they are close grain cast iron they a
Electronics Forum | Mon Oct 22 10:54:48 EDT 2007 | mulder0990
What type of feeder storage carts do you use for your feeders? I have many of the Fuji CP-6 racks, but I have found the few Mossman Tebbs racks mor useful and safer for the feeders. I am constantly fixing damaged tape leaf covers from operators not
Electronics Forum | Tue May 13 08:57:19 EDT 2008 | locostpp
It will be rigid, but not as rigid as something weighing 600lb's. We can't afford to cast/machine parts for a low cost machine. But we think have found techniques that can calibrate out any small distortions in the unit. Your comment about a decen
Electronics Forum | Thu Aug 25 17:24:44 EDT 2016 | davef
Gold should not be corroding in salt water. I have swum hundreds of miles in salt water with my wedding ring on my finger. My ring is a shiny and corrosion-free as the day it was cast over 120 years ago. It's possible that your gold thickness of 0.0
Electronics Forum | Tue Dec 24 03:51:35 EST 2019 | richardcargill
There's a place for both methods, but the advancements made year on year in 3D printing technology and quality give it the edge I reckon. We use 3D printing a lot and do it 'in house'. There's very little waste compared to machining a part from a bl
Electronics Forum | Wed Nov 29 10:50:24 EST 2000 | blnorman
Vacuum casting (same process used to make solid rocket motors) should remove any air from the paste. We had thought of pressurizing the tubes to remove the residual paste, but that would entrap air. The problem of tubes sitting out for different
Electronics Forum | Tue Jun 13 22:00:10 EDT 2000 | Dave F
Suan: I'll take the "easy half" of your question I suspect you�re talking about Kleenox. It is a powder that you can sprinkle on your dross bed. Several points are: � Kleenox does not reduce dross. It reduces the amount of solder entrapped in dr
Electronics Forum | Wed Mar 29 17:10:25 EST 2000 | Jon Wentz
Hi Dave, What feeder model do you have? I took a quick look in my parts list manual and again, depending on your feeder model, you might be able to buy the needed part(s) from Zevatech/Juki. Have you checked with them yet? For example, the main feed
Electronics Forum | Mon Jun 18 19:49:45 EDT 2001 | Gil Zweig
To best visualize the factors effecting resolution, carry in your minds eye an image of a light shadow being cast on the wall using a flashlight. The size of the flashlight filament would be the analagous x-ray "focal spot" The smoothness and/or roug