Electronics Forum | Thu Apr 13 12:58:49 EDT 2006 | caldon
Hi Brian- All is well on my end. I have not been to SMTNET in a long while but pop in from time to time. Working here at Agilent gives me more of an opportunity to check in. How are things on your end? Where are you working these days? Cal
Electronics Forum | Thu Feb 04 21:17:41 EST 1999 | Chris G.
| What allowances are people using out there for components off-pad, we currently use 50% of lead width without breaking trace/component clearances but we have a customer demanding 25% allowance ? | IPC states: 50% off pad for class 1 and 2 25% off
Electronics Forum | Thu Dec 17 10:54:43 EST 2020 | spoiltforchoice
Unless you have a firm grasp on the circuit and electronics in general, you are on a hiding to nothing. Testing components in circuit is complex, because its a circuit and any measurement you make is affected by connected neighboring ones. If you set
Electronics Forum | Thu Feb 24 23:01:30 EST 2005 | smtuser1234
One other thing to check is your PEC camera. Universal uses a jig to calibrate this camera but you could check it using this method. 1.Run about ten 0402 parts on tape with the PEC camera off and check placement. If the placement is off change the x\
Electronics Forum | Fri Nov 08 14:53:11 EST 2002 | davef
Cut the sucka off the board and move on.
Electronics Forum | Wed Jan 10 13:03:50 EST 2007 | aj
We also took the shields off one of the boards and retested and it still fails...
Electronics Forum | Fri Sep 18 12:21:03 EDT 2009 | kennyg
Does anyone have any off-the-shelf tool for measuring air gaps under components? Specifically to measure if a part is raised beyond special specifications, such as determining if a leaded connector is raised beyond 5, 10 or 20 mils from the PCB surf
Electronics Forum | Thu Feb 04 06:50:35 EST 1999 | Greg Flynn
What allowances are people using out there for components off-pad, we currently use 50% of lead width without breaking trace/component clearances but we have a customer demanding 25% allowance ?
Electronics Forum | Thu Feb 04 09:09:11 EST 1999 | Peet
| What allowances are people using out there for components off-pad, we currently use 50% of lead width without breaking trace/component clearances but we have a customer demanding 25% allowance ? | We use 50% for civile application, and 25% for mil
Electronics Forum | Mon Aug 31 13:29:26 EDT 2020 | dwl
What exactly do you mean by component shifting? If you mean lead over hang, i.e, how far off the pad can a component lead sit and still be acceptable, IPC 610 addresses this.