Electronics Forum | Mon Aug 25 22:14:34 EDT 2003 | davef
You need a nylon with a heat deflection temperature [heat distortion temperature] - 0.45MPa ( C ) similar to your reflow peak. The HDT of the nylon in your connector is probably ~200*C. For more, look here http://www.tycoelectronics.com/environment
Electronics Forum | Thu Sep 16 09:07:20 EDT 1999 | Chris McDonald
We have a new custumer that needs thier thru-hole/smt boards conformally coated. We currently do not have a selective spraycoating system adn this low volume of these board do notwarrant a 100k machine. We are spending way to much time masking and un
Electronics Forum | Thu Aug 09 15:16:20 EDT 2001 | Adam
Thank you Michael, yes we use a Fine Focus X-Ray machine, we also had some dummy connectors to play with, so we profiled the board until we reached a desirable profile. For placement we used a GSM machine, the only issue we ran into there is the par
Electronics Forum | Thu Aug 09 15:16:31 EDT 2001 | Adam
Thank you Michael, yes we use a Fine Focus X-Ray machine, we also had some dummy connectors to play with, so we profiled the board until we reached a desirable profile. For placement we used a GSM machine, the only issue we ran into there is the par
Electronics Forum | Wed Aug 08 21:23:15 EDT 2001 | davef
Very smooth. First, describe how this thing wowls at the moon. Next, state that process time is so long that you can't afford to make it. Finally, you ask someone to make it for you. Let's get Mikie to do it. Hey, Mikie ...
Electronics Forum | Mon Mar 19 11:54:35 EDT 2012 | JB
Hello KaHrpr. I can't seem to find the single row version, also they need to be offset slightly so when you flip them over they align to different pins.
Electronics Forum | Wed Apr 04 13:54:38 EDT 2012 | rway
I'm sure Digi-Key has them. If you call them directly they can help match you up to the right part.
Electronics Forum | Thu Sep 16 20:45:51 EDT 1999 | Dave F
| We have a new custumer that needs thier thru-hole/smt boards conformally coated. We currently do not have a selective spraycoating system adn this low volume of these board do notwarrant a 100k machine. We are spending way to much time masking and
Electronics Forum | Thu Aug 09 12:36:26 EDT 2001 | Michael Parker
Adam- Mikie here. I too am placing 2 PBGA sockets on an assembly but they aren't mirror imaged. Thanks to the SMT Gods for that one. You say you added more paste to solve for open solder. Do you have x-ray? Were the alignments perfect? Also the part
Electronics Forum | Thu Aug 19 09:38:24 EDT 2004 | russ
We use a locally made fixture that uses tooling pins and a mating block to place the connector onto/into. We then use a toggle clamp to push the connector onto the board. We had to make no adjustments to stencil for our application. Russ