Electronics Forum | Fri Aug 28 11:59:05 EDT 2015 | gascon5383
Actually I should have noted we resolved this issue. After chasing our tails for a while, we found that somehow there was a static charge on the boards going into the machine. This static was discharging to the camera through the board stop, causing
Electronics Forum | Fri Sep 07 16:53:37 EDT 2012 | burb1999
We have Heller, 1707EXL now. It has a removable support for the mesh conveyor that just pull out (clipped in). Had an Electrovert and they were bolted on and very tuff to change out. The oilers Im not sure I care for though,they have a metal rail t
Electronics Forum | Thu Jul 26 18:14:19 EDT 2001 | Andy
Doug, This could be our KS100 or KS50. We have a bank of cameras mounted above a conveyor. We're based in Minneapolis. I don't want to flood the board with advertising so if you need any info, please email me. Andy
Electronics Forum | Fri Sep 17 18:45:07 EDT 2004 | russ
Get ahold of symbol technologies. They have scanners that you can mount to anything. You should be able to mount it on a conveyor with a bracket that allows you to slide it back and forth and rotate as required in about 10 sec. Russ
Electronics Forum | Tue May 02 16:05:35 EDT 2006 | Giovanni Lorenzini L�pez
We are looking for 3 used FIFO buffers in operational conditions model CTI Conveyor Technologies PB-0.6M-9, FOB Puerto Rico. Any informationplease contact Giovanni Lorenzini my e-mail adress is glorenzini@lutron.com
Electronics Forum | Mon Sep 29 07:10:37 EDT 2008 | g2garyg2
PROMATION builds edge carry style UV systems, integrating DYMAX, FUSION and other technologies. (262) 857-3100 x 111 or www.pro-mation-inc.com
Electronics Forum | Mon Feb 09 10:19:27 EST 2009 | tomg_fla
I am looking for a semi-manual system that an operator can use on a 2 meter conveyor to assist in part placement onto printed boards. We do some prototype assemblies where we don't get parts tape and reeled. Am looking at something that can pick up a
Electronics Forum | Mon Feb 09 12:27:41 EST 2009 | markhoch
I too am interested if anyone has any assistance that they can provide. A few years ago I took a table top, manual pick and place system and had a "table" machined that would allow me to bolt it onto one of our two meter, Inspection Station, conveyor
Electronics Forum | Tue Jul 17 19:52:02 EDT 2001 | dougs
Does anyone remember the name of the company that had a small inspection system located on the tact line behind the CP732E from Fuji and the reflow oven? It was a real simple system located on top of a standard conveyor. Pick your brains and let me k
Electronics Forum | Mon Aug 27 15:50:05 EDT 2001 | seand
Hello Everyone, The MPM UP 3000 may be a good bet for your Screenprinting application and I am aware that there are a few in inventory at Speedline Technologies (MPM) that you should be able to get with a warranty for a good price. I know wide vers
