Electronics Forum | Fri Apr 27 10:38:30 EDT 2007 | pjc
No dome needed. You should check what type probe you have. You can look here and consult with them: http://www.qualmaxamerica.com/qualmax/leeno/semi.asp?string=ICT
Electronics Forum | Tue Sep 04 13:11:06 EDT 2007 | ratsalad
Let me know how you make out with these. We are looking in to building some boards with them as well. Don't touch the dome with the nozzle when you pick the part!
Electronics Forum | Thu Jul 24 12:36:54 EDT 2008 | rfematt
We have a new board that requires a membrane switch. The membrane switch is a 1" stainless-steel dome. We were wondering if ENIG plating will hold for an expected life
Electronics Forum | Tue Sep 09 06:29:27 EDT 2008 | arzu
i'd like to have design information about how to produce membrane switches using the screenprinting process (making silver traces, buying /placing domes) Who knows where to find information? (we normally only produce the artwork)
Electronics Forum | Tue Aug 01 09:45:58 EDT 2017 | dontfeedphils
Are you using a custom nozzle meant for the domed LEDs? If not, that should help quite a bit and are less expensive than you may think.
Electronics Forum | Wed Mar 21 14:12:38 EDT 2018 | rob
Yep, especially if they are the silicon domed type that mark easy. We gang pick LEDs on our Yamaha kit, getting 12 at a time per side, but we have the luxury and volume of having multiple reels of the same components.
Electronics Forum | Mon Apr 18 12:05:22 EDT 2022 | proceng1
Is it the CREE with the soft dome? We had to get specially made nozzles for our SAMSUNG machines to pick up cree LEDs correctly. They are basically rubber tipped. We bought from Count on Tools website.
Electronics Forum | Thu May 10 08:56:38 EDT 2001 | stefwitt
I think the main purpose of cleaning a fiducial is not to make them nice and shine, but to get a haze on them. In particular dome shaped fiducials create too much reflection from the light source and distort the image. The eraser pencil is a bandage,
Electronics Forum | Sun Nov 22 10:05:37 EST 1998 | Christopher Lampron
| Does any body know stencil manufacturer in states or south east asia for electroforming processes and step down from 5mil to 3mil. | | Thanks! | Daniel, I do alot of work with Photoetch stencils in Massaschusetts. I do not have the Phone number h
Electronics Forum | Fri Sep 21 14:45:36 EDT 2001 | jschake
I asked several people their opinion of HASL 0201 pads and there was no positive feedback whatsoever. The most common concern was the domed/convex shape of the pad finish that would result in aperture gasketing problems, which you may already have e
.gif)
