Electronics Forum | Thu Jan 25 12:02:20 EST 2018 | deanm
When leaving a job set up on pick and place machines, it is important to return any moisture sensitive devices on reels to a dry cabinet overnight to reduce the exposure time. What are some ways to identify which reels need removed? A sticker placed
Electronics Forum | Tue Jan 30 14:24:55 EST 2018 | emeto
I used to bake parts before. After I discovered the drying cabinets, that is not a concern anymore. I strongly recommend you to get one of these and try it. It dries them out pretty quick and keeps very low humidity all the time. No heat applied.
Electronics Forum | Tue May 14 14:18:56 EDT 2002 | dason_c
Recently, our customer request us to use the N2 dry cabinet and we are currently using the desiccant type dry box. My concern not only the cost. Is it any data to show if the component exposed to the floor for a while and store back into the N2 cab
Electronics Forum | Mon Nov 12 17:14:53 EST 2001 | dason_c
We have under evaluation one of the dry cabinet and it can drop down the humidity to 10% within 20 minutes from room. You can check this web site, http://www.cabiusa.com Dason.
Electronics Forum | Mon Jan 30 11:57:06 EST 2006 | james
We are running under 5% RH. The parts we are having problems with are QFP 208. We have a clean process and right now I am baking 3 boards before they remove the parts and then sending them back to test.
Electronics Forum | Mon Oct 02 05:51:46 EDT 2006 | dave
All, What controls do you have in place for PCB moisture control? If you had a kit of 400 and you ran out of a part which wasnot due in until 6 weeks- do you store the boards in a dry cabinet ? Vacuum seal and store on a rack? Alan...
Electronics Forum | Wed Jul 09 13:12:18 EDT 2008 | josh_brubaker
Ours are catagorized under "New Machine Justification" for getting the proper equipment for the job. I might catagorize this one under "Dry Cabinet"
Electronics Forum | Thu Feb 18 06:32:29 EST 2010 | nico67640
If I place a MSD level 4 open more than 8 hours in a dry cabinet
Electronics Forum | Tue Feb 06 04:58:30 EST 2018 | robl
You can also get dry cabinets that you can wheel your feeder carts directly into (if you have quick change carts) when not producing to extend floor life.
Electronics Forum | Fri Apr 02 12:41:12 EDT 2010 | CL
Nicolas, 4.1.2.1 and 4.1.2.2 mention the requirements for drying an MSD to resett the clock life. 4.1.2.2 states that once a component is dried, refer to 5.3 for safe storage. Under that specification is 5.3.3.2 DRY Cabinet at 5% RH- This states tha