Electronics Forum | Thu Oct 05 12:51:27 EDT 2006 | john_smith
cn, Currently we have a DEK265GSX a DEK Infinity and a MPM UP3000 printers and previously had MPM Accuflex,MPM UP1500 and MPM AP24s. No advice for the UP3030. We always had to work on all of the MPM printers for one thing or another and every time we
Electronics Forum | Fri Jul 31 09:36:17 EDT 2009 | spitkis2
Does anyone know of fully automatic pick and place machines that can pick up parts either from small pieces of cut tape (i.e. 0402's, 0603's, SOT's) or components loosely arranged on a tray (not ic's that are in matrix trays)? Application is proto
Electronics Forum | Fri Mar 15 23:09:03 EDT 2024 | erikfriesen
You haven't said what kind of parts you are placing, what is the minimum size component? You might consider multiple machines in line rather than trying to fit this all in one machine, plus this has the advantage of upping throughput. You could get
Electronics Forum | Fri Aug 04 15:46:08 EDT 2006 | Chunks
Two reasons company B is asking $40 instead of $15-$20; 1. The set-up of their placement equipment takes time, thus the extra labor. Parts may be hard to get or what they norm keep in stock, plus storage of parts. 2. They know they can get awa
Electronics Forum | Wed Oct 10 14:21:04 EDT 2007 | petep
We have done the Green Framed Stencils for an added $50.00 per, then got smart and went to green polyester on RoHS / Lead Free Stencils at no added cost. Dedicated Stencil blades and holders green of course) as well as Green Static mats on dedicated
Electronics Forum | Tue Nov 12 17:11:32 EST 2013 | mondalaci
Hi Folks, I'm working on a LED display that is composed of multiple layers. What is interesting for the point of this discussion is the PCB layer and the light deflector layer on top of it. Please take a look at the related pictures at http://plus
Electronics Forum | Wed Jan 06 14:54:42 EST 1999 | Steve Gregory
| Steve, | | So good to see you back, old boy! Where ya been???? | | Chrys Hi ya' Chrys! Oh, I've been around...just haven't had a whole lot of time like I used to. The place I'm working at now is a start-up (as you may know, I think I ment
Electronics Forum | Tue Oct 09 12:23:07 EDT 2001 | Mike Konrad
Hi Danial, Yes, you can use one cleaning chemistry for all paste types. There are many available chemistries from many manufacturers. The chemistries that I would recommend include: StencilWash Plus from Aqueous Technologies http://www.aqueouste
Electronics Forum | Tue Aug 18 22:22:43 EDT 2009 | comatose
Assuming you want to run 8 hours a day and 5 days a week, you need a sustained throughput of 2.5k components per hour. With fine pitch, futzing around, setup, etc you should really look for machines rated in the 4k to 5k per hour range. That's not sc
Electronics Forum | Sun Sep 07 20:51:52 EDT 2014 | natashakt
1. Is the high RH environment consistently at 72% RH and 21.4 degrees Celsius? No, over the past 2 weeks I have recorded the highest at the moment: 67% RH at 22.6 degrees C and lowest (it is Spring not summer yet): 31.9% RH at 19.0 degrees C. Or d