Electronics Forum | Wed Aug 28 06:12:53 EDT 2013 | hervé
i've a competitor selective soldering and i would like test the adique acide to clean the nozzle. How much do you use approximativemely to clean a 8/4 mm nozzle?
Electronics Forum | Thu Sep 15 06:59:33 EDT 2005 | Adam
Hi, No we did not look at Pillerhouse, We were not particular fond of "moving the product" principle to selective (i.e using a gripper over a static nozzle), as often this requires pallets, and our sister plant had already completed testing which a
Electronics Forum | Thu Dec 29 11:54:31 EST 2005 | Cmiller
We bought the lead free pots for the Ersa machine and change back and forth. We had a lot of problems running SAC305 in the Ersa. It seems to create a ton of dross and you need to frequently clean and flux the nozzles. I would really like some feed
Electronics Forum | Thu Apr 25 09:57:31 EDT 2013 | jaimebc
We aquired an ERSA ECOSELECT 2 selective soldering machine. So we are going through a learning curve and I would like to hear from ERSA users on this subject. The main concern is to keep the miniwave steady, it seems that it " bounces" a lot and is
Electronics Forum | Thu Jun 06 13:04:50 EDT 2013 | williamaxler
I used method 'A' but I leave the wave on. I use a stainless steal brush like 7248T13 on McMaster-Carr.com. This way I can apply the acid and scrub the nozzle. Another important part is get a small brush to push down into the nozzle to make sure y
Electronics Forum | Fri Jan 10 09:38:36 EST 2003 | larryk
We been using the ERSA for a couple of years now with no problems. Guess I can't comment on the poor service as I haven't required their services. I sampled in all the units you mentioned, each was nice in their own way. One of the things that influe
Electronics Forum | Fri Apr 10 05:14:01 EDT 1998 | Ben Salisbury
| | | | Has anyone had any success in repairing Fuji CP nozzles in house? Removing bent press fitted nozzle and replacing. Any input would be appreciated, please no solicitation from repair shops So far I havn't had any luck in doing this...but then
Electronics Forum | Sun Mar 15 23:48:59 EST 1998 | Phill Hunter
| | | Has anyone had any success in repairing Fuji CP nozzles in house? Removing bent press fitted nozzle and replacing. Any input would be appreciated, please no solicitation from repair shops | | Rob, | | What model of CP? | Mr. Kooki | CP4 and 6
Electronics Forum | Mon Jul 26 14:16:54 EDT 2010 | jdengler
I don't find this P/N in my list of 2.5mm IP2 nozzles. But we buy from and have bad nozzles repaired by SMT Researh. www.smtresearch.com Jerry
Electronics Forum | Thu Jan 09 18:46:04 EST 2003 | ReworkMAN
The DRS systems are far superior. They don't compete with ERSA or Metcal. The nozzle technology, heaters, and software are so much better. I would find a used DRS22C and use it before those other systems. The vision system in the DRS22 is great