Electronics Forum | Mon Jun 27 19:06:03 EDT 2005 | Abid
I have a HDD/SUB red led on, it means that hard drive needs formatting. In order to format I need to know what size is the hard drive. How can I find out ?.
Electronics Forum | Tue Jun 28 04:24:24 EDT 2005 | ajaydoshi
It is not require to format. just instal system disck again. mostly it will be through & data also saved. if you format all data will go
Electronics Forum | Fri Sep 19 11:59:57 EDT 2008 | john_smith
Ralph, Is this problem related to all product or is it product specific? You may need to change the fiducial data in the program. I am not familiar with flexa but have some knowledge with MCS30.
Electronics Forum | Mon Nov 02 07:59:32 EST 2009 | shannond
Contact Greg Frazier at Automated Technology Services, he may be able to help you. He's been fixing my Fujis for a long time. greg.frazier@ats-smt.com
Electronics Forum | Fri Oct 25 14:22:55 EDT 2013 | jimmyboz
Yes, but barely. Its been a long time. Move the monitor connection to the other port it will fit on the MCS. If that doesn't do it straight away report the situation and I'll try to remember more.
Electronics Forum | Tue Apr 28 09:03:30 EDT 2009 | adamconaway
We have recently purchased a CP643, a CP6 and an IP3 in addition to our older fuji equipment. I am in the process of setting up the line descriptor on the MCS30 and I cannot locate the machine_type #'s for any of these machines. Can anyone help me ou
Electronics Forum | Thu Apr 12 17:49:35 EDT 2012 | rodrigo
I've done the Fuji flush. It does the same thing. We can not load proper again because it does not communicate with either the F4G or MCS/30. I was able to boot into mechanical mode at one point but now I can not do that either. This thing is drivi
Electronics Forum | Thu Dec 06 09:10:09 EST 2012 | cnotebaert
I don't even have that at this point, these are machines we have had, and are bringing out for a high volume run. no one has ever run or programmed them! yup! I have a little work ahead of me! can I program with either mcs16 or mcs30
Electronics Forum | Thu Dec 20 12:14:37 EST 2012 | dhopps
If you go with MCS I would recommend using an MCS30. You would have to make sure that the E-Proms for host communication are installed in the MCS and the host module (software)as well. You would then need CadConvert to program and transfer programs
Electronics Forum | Thu Jul 23 17:54:29 EDT 1998 | Cunli Jia @ SMTnet
Ben, Thought your message should have been posted to the PCBCE Mart but it does belong to here for now. We have been trying to build up the Blue Book to help answer exactly your question but so far progress there has been slow. If you get any info