Electronics Forum | Mon Oct 31 09:52:23 EST 2005 | slthomas
The only problems I've ever had with 208's shifting out of alignment was with a board with too much HASL thickness. The lands had a convex profile and the parts kept slipping downslope. We put down a glue dot and ranted at our board supplier. Both
Electronics Forum | Tue May 16 16:36:18 EDT 2006 | dougm
Has anyone had issues with chips not making a reliable connection in sockets with a matte tin finish (RoHS compatible)? We have had issues with these types of sockets. I sent some to the manufacturer, and was told there weren't any problems. We re
Electronics Forum | Wed Jul 05 11:44:04 EDT 2006 | Rob
We had one mechanical engineer from a certain customer telling us we had to crop components leads so they didn't protrude through the board, as they could then come in contact with the case as the board was flush. Had I have known then what I know
Electronics Forum | Tue Aug 01 15:02:06 EDT 2006 | BillB
Had a Treiber in a past live. Had a standard air knife in the first section and then a turbine blower with a stainless steel air knife with about 15-horse motor. Had some problems with bearing on the turbine Make sure the exhaust hot air doesn't con
Electronics Forum | Tue Sep 05 09:54:33 EDT 2006 | slthomas
We had the same problem with our E5. I had the shop make us a template for each two-sided board out of some 1/16" acrylic. The template had cutouts in it to drop the pins through where the bottom side parts weren't. Seemed to work fairly well, no com
Electronics Forum | Fri Nov 09 15:09:42 EST 2007 | mmjm_1099
Hopefully this will help you. I happen to have a few similar problems with PN# MC33982BPNA. I had the stencil made at 6mil thick and had a step-down for 5mil in the problem areas. That seems to take care of the problem we had at the time. ALSO FORGOT
Electronics Forum | Tue Sep 02 10:04:24 EDT 2008 | cyber_wolf
Good luck with that one. We just had a hard drive crash in one of our TRS ovens. We had to upgrade to wincon software which = 1500.00 and then we had to pay a 450.00 service fee so they would talk to us. BTW...the $450.00 service fee only gets you 1
Electronics Forum | Wed Jan 21 03:09:56 EST 2009 | lkpdsund
I totally agree with Wolfman. I recently had the SMA responsibility for a new product from a new customer. The PCB had 600+ mounting positions. It took me almost two days insering them into the part library because an unusual number of the positions
Electronics Forum | Tue Aug 17 16:07:23 EDT 2010 | scottp
Are you controlling humidity in your plant? I'm not familiar with that particular paste, but some pastes are sensitive to a humid environment. We also had one paste supplier send us a batch that had excessive solder balls if the boards were printed
Electronics Forum | Tue Sep 14 04:00:12 EDT 2010 | genesan
Hi Sir grahamcooper22, There should not a issue in stencil since i had open the aperature 1:1(one to one).Futhemore this is HASL pcb coating as now our customer had convert to immersion silver.I had do comparison between both and found HASL wetting n